SpeedyBee F405 40A Bluejay 3-6S AIO Flight Controller/ESC - 25.5x25.5mm

Specifications:

Flight Controller

• Product Name    SpeedyBee F405 AIO
  
• MCU    STM32F405
  
• Gyro    ICM-42688P
  
• USB Port Type    Type-C
  
• Barometer    SPA06-003
  
• OSD    Supported
  
• Bluetooth BLE    Supported, Bluetooth speed enhancement - 2.0
  
• Wireless Flight Controller Firmware Update    Supported (no need to press
• physical BOOT button)
  
• Wireless Download & BlackBox Analysis    Not supported
  
• DJI Air Unit Connection Method    Supports both 6-pin direct insertion and soldering
  
• 6-pin DJI Sky Port Direct Insertion    Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
  
• Flash (for BlackBox)    8MB
  
• Betaflight CC Pads (Camera Parameter Adjustment)    Supported
  
• Input Voltage    3S-6S LiPo battery
  
• 4V5 Output    Two 4V5 outputs; total current 1A
  
• 5V BEC Output    Three 5V outputs; total current 2A; shared with 4V5
  
• 9V BEC Output    None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
  
• MOTOR    M1-M4
  
• UART    4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
  
• ESC Telemetry    None
  
• I2C    Supported
  
• LED Pads    Supported, used to control WS2812 LED lights
  
• Buzzer Pads    Supported, BZ+ and BZ- pads
  
• BOOT Button    Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
  
• RSSI Pads    None
  
• SmartPort    Not supported
  
• Supported Flight Controller Firmware    BetaFlight (Default), INAV
  
• Firmware Target Name    SPEEDYBEE F405AIO
  
• Mounting    25.5 x 25.5mm, 3mm hole diameter
  
• Dimensions    33.0mm (length) x 33.0mm (width) x 8mm (height)
  
• Weight    13.6g (including CNC)

ESC

• Product Name    SpeedyBee F405 AIO
  
• Input Voltage    3-6S LiPo battery
  
• Continuous Current    40A
  
• Burst Current    45A (10s)
  
• ESC Protocol    Supports DSHOT600/300; other protocols may cause severe errors,
• please use with caution.
  
• Output Voltage    VBAT battery voltage (used to power the flight controller)
  
• Current Sensor    Supported (Scale = 254, Offset = 0)
  
• Firmware    Bluejay JH-40 48kHz
  

Download the Manual here

Download the Firmware here