Learn FPV!
FPV made simple!
4.9 / 5.0
187 Reviews
Your FC or 4in1 ESC manufacturer does not include the harness you need?With this kit you don't need to try finding the matching harness.Kit include...
View full details4.9 / 5.0
122 Reviews
Due to high demand we brought the Pyrodrone staggered race wires back with added LEDs.Available in 25mm and 35mm to fit almost every frame on the m...
View full details4.9 / 5.0
149 Reviews
Due to high demand we brought the Pyrodrone staggered race wires back with added LEDs.Available in 25mm and 35mm to fit almost every frame on the m...
View full details5.0 / 5.0
97 Reviews
This high-quality Silicone Wire is essential for all your drone building needs. With 1 meter of red and 1 meter of black wire and 8 different gauge...
View full details4.8 / 5.0
87 Reviews
If you're looking for a simple solution to add LEDs to your drone look no further!No wires no mess, just direct solder to your XT60 connector and y...
View full details4.9 / 5.0
145 Reviews
The FETtec Spike Absorber uses well-chosen TVS-Diodes to prevent the connected components from huge voltage spikes. The Spike Absorber is meant to...
View full details4.8 / 5.0
61 Reviews
Achieve pristine cable management in your builds, and hide any unsightly or ugly wires! Check out all our Building Tools and the rest of our Capaci...
View full details4.9 / 5.0
83 Reviews
We've all been there, ripped balance leads are part of FPV racing.Repair your battery with these silicone wired replacement leads. Available For: 4...
View full details5.0 / 5.0
68 Reviews
Use these Lipo Pigtails to connect your XT60 Lipo to your multi-rotor or other build. 10cm (aprox. 4 inch) long 14 AWG silicone wire attached to a ...
View full details4.9 / 5.0
61 Reviews
Name WaFL’s XT60 Cap Cap (Set of 3) Vendor SKU WAF002 MSRP (USD) 4.99 MAP (USD) 4.99 Product Description The XT6...
View full details4.9 / 5.0
62 Reviews
Product Information: Name WaFL’s Cap Cap (Set of 5) Vendor SKU WAF001 MSRP (USD) 4.99 MAP (USD) 4.99 Product Des...
View full details4.8 / 5.0
53 Reviews
Great for protecting your Motor wires from prop strikes, and making your build super clean! Check out all our Building Tools and the rest of our Ca...
View full details5.0 / 5.0
53 Reviews
Avoid imminent disaster with the TBS Smoke Stopper: A self-healing / re-settable fuse in line of the power going to your quad. DISCLAIMER: This is...
View full details4.9 / 5.0
82 Reviews
This is the second iteration of the ShortSaver! With power on/off switch for easier receiver binding and a button to adjust short-circuit and over-...
View full details4.8 / 5.0
40 Reviews
14AWG 4" silicone pigtail with XT60H mail connector ready to be soldered to your 4in1 ESC. Check out our entire selection of Connectors and Chargin...
View full details4.8 / 5.0
76 Reviews
Race Wire that was designed to perfectly fit over the arms of the Apex frame!Protects your motor wires from prop strikes, and lets you change motor...
View full details4.9 / 5.0
54 Reviews
XT60H are an upgraded XT60 connector removing the requirement for additional heat shrink.The new added sheath protection prevents bending at the so...
View full details4.9 / 5.0
48 Reviews
Kit includes: 40 pcs. 2.0mm x 30mm 40 Pcs. 2.5mm x 60mm 20 Pcs. 3.5mm x 60mm 15 Pcs. 5.5mm x 60mm 10 Pcs. 6.0mm x 60mm 8 Pcs. 8.0mm x 100mm 15 Pcs...
View full details4.7 / 5.0
42 Reviews
A big selection of heat shrinks!Checkout our other all black version of heatshrink pack and our clear battery heat shrinks.Also check out our wide ...
View full details4.9 / 5.0
74 Reviews
Within this boxy box there is many spools of the most important types of multi-stranded wire that one might ever be in need of. We here at Ethix h...
View full details4.9 / 5.0
61 Reviews
BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drones. Transfer all of your older micro batteries to the new BT2.0 connector! S...
View full details4.7 / 5.0
23 Reviews
Replacement XT30 pigtail for the CRBF4 boards.The additional capacitor is HIGHLY recommended to avoid the regulator burning issue on the Crazybee A...
View full details4.8 / 5.0
51 Reviews
Takes our previous XT60 Cap Cap design and combines it with a high-quality Panasonic FM capacitor and genuine Amass connector!We wanted to take it ...
View full details4.9 / 5.0
37 Reviews
XT60H are an upgraded XT60 connector removing the requirement for additional heat shrink.The new added sheath protection prevents bending at the so...
View full details4.8 / 5.0
36 Reviews
Product Information: Name WaFL’s XT30 Cap Cap (Set of 4) Vendor SKU WAF002 MSRP (USD) 4.99 MAP (USD) 4.99 Produc...
View full details4.9 / 5.0
17 Reviews
Protect your micro sensitive AIO boards with this capacitors Specifications: Size: 5mm x 8mm Voltage: 16v Capacitance: 100uF Package includes : ...
View full details5.0 / 5.0
22 Reviews
Replacement wire harness for TBS Unify RACE and Unify HV. We also carry the 7 Pin Version for the newer Unify that uses 7 Pin socket Package Inclu...
View full details4.9 / 5.0
18 Reviews
GNB A30 High Current Connectors are designed to handle up to 15A of continues current while providing a reliable connection with minimal resistanc...
View full details4.9 / 5.0
26 Reviews
In our FPV hobby, capacitors are becoming an essential component due to high power motors and noisy electronics. Don't forget to use a capacitor to...
View full details5.0 / 5.0
35 Reviews
BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone. To provide our customers with the greatest convenience, we specially made...
View full details4.8 / 5.0
37 Reviews
Get your sunglasses out here comes the brightest LED’s for your drone, plane, boat car, or any RC model. Perfect to be seen racing, for Freestyle, ...
View full details5.0 / 5.0
15 Reviews
In our FPV hobby, capacitors are becoming an essential component due to high power motors and noisy electronics. Don't forget to use a capacitor to...
View full details5.0 / 5.0
19 Reviews
iFlight XT30/ XT60 Smoke Stopper ,Every quad/drone owner should have one.A smoke stopper can help avoid damage when you power on a mini quad drone ...
View full details5.0 / 5.0
11 Reviews
The Balance Lead Extension Cable (JST-XH) allows for more flexibility when charging your batteries. With a length of 200mm, its balancing cable mak...
View full details4.9 / 5.0
19 Reviews
Use these lipo pigtails to connect your XT60 lipo to your multi-rotor or other builds! Kit includes 10cm (approx. 4 inch.) long 12AWG silicone wir...
View full details4.8 / 5.0
21 Reviews
The RUSH BLADE Power Filter Board Lite by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure ...
View full details4.8 / 5.0
16 Reviews
Protect your motor wires and avoid shorts due to prop strike with this simple PCB.3 oz. of copper to withstand high amp setups and staggered pads f...
View full details4.9 / 5.0
17 Reviews
The RUSH BLADE Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and h...
View full details4.5 / 5.0
10 Reviews
In our FPV hobby, capacitors are becoming an essential component due to high power motors and noisy electronics. Don't forget to use a capacitor to...
View full details4.9 / 5.0
12 Reviews
This power cable with XT30 connector is specially made for 4S whoop drone, soldering with the capacitor specification with 25V/220μF/20%, for prot...
View full details5.0 / 5.0
7 Reviews
The RCswitch is capable of switching loads or auxiliary items ON/OFF by connecting to your receiver and controlling from any channel on your radio....
View full details5.0 / 5.0
4 Reviews
Avoid imminent disaster with the JHEMCU Smoke Stopper 1-6S XT30/XT60: A self-healing / re-settable fuse in line of the power going to your quad. T...
View full details5.0 / 5.0
10 Reviews
Nothing special here just a clear XT60 connector, however this connector turns to something super special when combined with our XT60 Pyro-Leds.Re...
View full details4.8 / 5.0
12 Reviews
This kit allows for you to make cables that work with most ESC’s on the market. Check out all our BrainFPV Products! Includes: 10-pin JST-SH conne...
View full details4.9 / 5.0
8 Reviews
GNB A30 High Current Connectors are designed to handle up to 15A of continues current while providing a reliable connection with minimal resistanc...
View full details4.8 / 5.0
4 Reviews
This 5-pack of GNB A30 > PH2.0 Charging Adapters will help you quickly and easily charge A30 connector batteries from PH2.0 equipped connector ...
View full details5.0 / 5.0
4 Reviews
Unleash the full power of your tiny whoop drones with the GNB27 battery connector from GNB! Check out the rest of our Wiring and Capacitors and o...
View full details4.9 / 5.0
7 Reviews
PH2.0 Power Connector w/Capacitor for Emax Tinyhawk 3. Check out all Tinyhawk 3 Related Collection and the rest of our Emax Gear! Package Includes...
View full details$99.00 away from free shipping!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}