Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm
Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm

Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm

$95.00 Sale

Availability: Available Unavailable

Product SKU: 69C-12090

Product Details

The Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack is a powerful combination that features a high-precision gyroscope and F7 processor for a stable flight experience. The 32bit ESC ensures an agile and smooth transition from acceleration to deceleration. Its 30x30mm mounting size makes it suitable for many drone builds and projects.

Check out all our Stacks and the rest of our Skystars Products!

 

Flight Controller Specifications:

  • MCU: STM32F722RGT6 216MHz
  • Gyroscope: BMI270
  • Baro:Bmp280
  • OSD: Betaflight SPI OSD DJI HD OSD(UART6)
  • Black box: 16MB
  • 6x Uarts: UART 1/2/3/4/5/6
  • 4x PWM outputs
  • 1x I2C
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • USB Type-C(USB2.0)
  • 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
  • 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
  • VTX 10V/Vbat filtered power ON/OFF switch
  • DJI FPV OSD is supported by any spare UART
  • LED: 4 LED independent pads, support WS2812 programming lamp output.
  • Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.


Power:

  • Input voltage: 3-6S
  • BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
  • LDO 3.3V: Max.250mA


Flight Controller Firmware:

  • BetaFlight firmware: SKYSTARSF722Pro
  • INAV firmware:SKYSTARSF722HD


Mounting:

  • Installation size: 30.5mm ¡Á 30.5mm The installation hole is M4 and supports shock column installation
  • External size 39mm ¡Á 39mm
  • Flight control weight: 6.9g
  • Flight control onboard voltage sensor.



AM60A 4IN1 3-6S ESC AM-32 DShot1200 600 4-in-1 ESC:

  • Support Dshot1200, Dshot600, PWM control signal
  • Input voltage: 3-6S LiPo
  • Con.Current: 60A
  • Peak Current: 80A¡Ý 10S
  • Firmware: AM_32
  • Support : Dshot 600/1200
  • Mounting hole : 30.5mm/M3
  • BEC: No
  • Product size: 41*46*7.6mm
  • Weight: 18g


1. Excellent over-current capability.
By adopt the best PCB material and PCB production process. Such as application of high TG materials , 3oz copper PCB & 2¦Ìm gold deposition process on PCB. Together with 6-layer layout design of board,compared with others common 4 layer,It can withstand bigger current.

2. Extreme stably support 6S LiPo battery
By use of 24 pcs of new Toshiba standard 40V 5x6 Mosfet & imported from USA or Japan electronic materials. Plus advanced lead-free SMT Processing technology.It make ESC can fully support 6s battery and get a better performance.

3. Excellent heat dissipation performance
The CNC hollow aluminum alloy shell use, Not only good for heat dissipation, but also get a beautiful appearance.

4. Better control performance
Flashed with the latest AM_32 firmware in factory, support telemetry functions (including voltage ,RPMS & current )


Package Includes:

  • 1x F7HD Pro3 FC
  • 1x AM60 AM_32 4IN1 ESC
  • 8x Silicon grommets M4 to M3
  • 2x JST-SH1.0_8pin cable, 4cm
  • 1x JST-GH-6P cable for DJI port, 10cm

Wiring Diagram

Loading...