Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm
Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm
Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm
Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm
Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm
Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm
Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm
Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm

Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm

$99.00 Sale

Availability: Available Unavailable

Product SKU: H2-9533

Product Details

SKYSTARS F7 F722 HD Pro 3 Flight controller and 45A Blheli-32 32bit ESC fly tower stack

Check out all our Stacks and the rest of our Skystars Products!

FC Specifications:

  • Flight control: MCU: STM32F722RGT6 216MHz
  • Gyroscope:BMI270
  • Barometer: BMP280
  • OSD: Betaflight SPI OSD DJI HD OSD(UART6)
  • Black box: 16MB
  • 6x Uarts: UART 1/2/3/4/5/6
  • 4x PWM outputs
  • 1x I2C
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • USB Type-C(USB2.0)
  • 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
  • 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
  • VTX 10V/Vbat filtered power ON/OFF switch
  • DJI FPV OSD is supported by any spare UART
  • LED: 4 LED independent pads, support WS2812 programming lamp output.
  • Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
  • FC Firmware:
    • BetaFlight firmware: SKYSTARSF722Pro
    • INAV firmware:SKYSTARSF722HD
  • Flight control weight: 6.9g

Power Specifications:

  • Input voltage: 3-6S
  • BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
  • LDO 3.3V: Max.250mA

Mounting Specifications:

  • Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
  • External size 39mm × 39mm

ESC Specifications:

  • Support 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
  • Power supply voltage: 3-6S (12-26V)
  • Continuous working current: 45A
  • No built-in 5V BEC output
  • Firmware: BLHELI 32 ESC
  • Screw hole spacing: 30.5*30.5MM
  • Weight: 14.6g
  • The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
  • EMI Shell provides stronger anti-interference capability.

  • Note: There is no difference in appearance between the 45A and 60A ESCs, which can be distinguished from the MOS tube.

Package Includes:

  • 1 x Skystars F7HD Pro 3 Flight controller and KO45A Blheli-32 128KHz ESC Stack - 30x30mm

Please note that latest batch is the F722 HD Pro 3 FC

Wiring Diagram

Loading...