Product Details
The Hydrophobe is a 255mm water-resistant 5" cine quad with a 2mm aluminum mid plate that doubles as a heat sink for your ESC and VTX. It has a 3mm bottom carbon plate, 6mm arms, and 1.5 mm top plate. A TPU skirt keeps rain, snow, and dirt out.
You can also augment it with sealant to make it as waterproof as possible.
You can 3D print your own parts here or if you need the parts 3D printed, please send the appropriate STL files to support@pyrodrone.com, and we will invoice you separately for them! 3D printed parts need 24-48 hours to be printed and shipped depending on the size and quantity.
Check out all our Frames and the rest of our Shendrones Products!
Note: Camera, Battery, Floats, and Electronics NOT included.
Disclaimer: This frame does not claim to be waterproof, but water-resistant.
Features:
- Equipped with an extra-long strap to wrap around the entire frame when mounting the battery.
- Arms are equipped with mounting points for floats.
- The DJI skirt has antenna holders.
- Aluminum Heat Sink Plate
- Waterproof
Build Tips:
- Avoid the use of a short strap looped around the outside of the tabs, that part is not meant for that amount of stress.
- Use a non-conductive thermal paste to transfer heat, but don't let bare boards directly contact the aluminum.
- An Immortal T holder is also available to screw on to the top plate.
Specifications:
- Frame Material: Carbon Fiber
- Size: 5" Frame
- Roughly 180 grams with skirt and GP mount
Package Includes:
- 1x Shen Drones Hydrophobe 5" Frame - Carbon and Hardware Only
Note: Camera, Battery, Floats, and Electronics NOT included.