Team Orqa is a group of FPV enthusiasts and engineers on a mission to design and build World’s best FPV gear.
Orqa FPV.P1 was designed and manufactured to be the best patch antenna in the entry-level segment.
The RF design of P1 is finely tuned so that the optimum range is exactly between 5.65GHz and 5.97GHz, with the best results between 5.7GHz and 5.9GHz, and peak performance at 5.8GHz (5.803 GHz, to be exact).
We have aimed to achieve exceptional VSWR with a solid cross-polarization attenuation. VSWR is a proxy to power transmission efficiency (how well the antenna delivers the RF energy to the receiver), and cross-polarization attenuation tells us how resilient antenna is to radio pollution from the multipath wave propagation (reflections of the original signal) and cross-polarization transmitters (radio sources transmitting on the opposite polarization).
At 5.803GHz, the P1 measures an exceptional VSWR of 1.174 with a very good level of worst-case cross-polarization attenuation of 15dB. Between 5.7GHz and 5.9GHz, the VSWR is well below 1.2 with good cross-polarization attenuation; towards the edges of this band, VSWR goes even below 1.1, but with weaker attenuation compared to 5.803GHz. Across the entire optimal frequency range, P1 measures VSWR within the limits of the optimal range (below 1.4).
- 6dBi Gain
- Right Hand Circular Polarization (RHCP)
- 5.65 GHz - 5.97 GHz
- 120° beam width (6 dB)
- 52 x 63 mm (max. dimensions)
- Connector: SMA
- 1 x Orqa Patch Antenna
If any warranty needs for this product arise, please note that the manufacturer of this product is one of the few manufacturers we carry that requests the end user to contact them directly for any troubleshooting or possibly defective items. We must follow these policies set by these manufacturers. Please make sure to contact them directly if you feel your product is defective in any way. Reach out to us if you need an email address or contact link for this manufacturer.