Product Details
The TITAN XL5 w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. Equipped with iFlight's latest SucceX-D F7 (50A 4-in-1 ESC) Stack and the popular XING motors. Everything you need just bind-and-fly!
Check out the Variable GoPro TPU Mount for this frame.
After our popular TITAN DC5 (DeadCat style frame) approach we decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle.
DJI HD FPV Goggles can be found HERE!
Checkout all our BNF/RTF drones and our full collection of iFlight products!
For replacements checkout the iFlight Titan XL5 and parts section
Recommended batteries:
HIGHLIGHTS:
- - 6mm arm design for more durability
- - XING 2208 motors for more power
- - GPS pre-installed for more safety at distance
- - 360° TPU protection and Antenna mounts
PRE-TUNED & PRE-SETUP:
- - Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
- - GPS-rescue mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)
- - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
- - Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!
FRAME // TITAN XL5：
- - Weight ：145g
- - Wheelbase: 250mm
- - Main body dimension: 185*133mm
- - Bottom to top distance: 30mm
- - Arm thickness: 6mm
- - Bottom plate thickness: 2mm
- - Top plate thickness: 2mm
- - Camera plate thickness: 2mm (2.5mm included TPU inserts)
ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC)：
- - Universal USB Type C connector instead of micro USB
- - Plug-and-Play DJI support. No need to solder tiny wires!
SucceX-D F7
- with 216MHz STM32F722 with 2x ICM20689 Gyros ready for SensorFusion.
- Up to 8S, Barometer, 32MB Blackbox Flash and 5V/9V to power all you might need.
SucceX 50A 4in1
- with BLHeli_32 up to 48kHz, 8 layers double-sided PCB and Top grade Mosfets.
BNF // Parts list (Build)
- 1 x TITAN XL5 HD Frame
- 1 x DJI Air Unit and DJI Camera
- 2 x Albatross LHCP RP-SMA 5.8g antenna
- 1 x TPU Bracket for DJI Air Unit Module
- 1 x TPU Antenna holder for DJI antenna
- 2 x TPU camera side plate soft mount
- 1 x TPU lens cover
- 1 x iFlight Lipo Strap
- 2 x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
- 4 x XING 2208 Motor Unibell（4S 2450KV，6S 1800KV）
- 1 x SucceX-D F7 Flight Controller
- 1 x SucceX BLHeli32 50A 4-in-1 ESC 2-6S
- 2 x MMCX to RP-SMA Female Adapter Cable
- 1 x GPS Module
