Holybro Kakute F4 V2.4 STACK W/Tekko32 F4 Metal 4in1 65A ESC & Atlatl HV V2 VTX - 30x30mm

Regular price $152.99 Sale

Availability: Available Unavailable

Product SKU: 39A-12169

Product Details

The Holybro Kakute F4 V2.4 Flight Controller includes plug-and-play DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash , 5V and 9V/3A BEC, easy soldering layout and much more.

The Kakute F4 V2.4 is DJI HD ready. It has an easy plug-and-play port with an on-board 9V/A regulator designed to power your HD video transmitter like DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers

Checkout all our 30*30mm Flight controllers, Stacks and our complete collection of Holybro Products!


Kakute F4 v2.4 Wiring Diagram

Kakute F4 v2.4 Manual & Pin Diagram


Kakute F4 V2.4

  • MCU - STM32F405
  • IMU - MPU6000
  • Barometer - BMP280
  • OSD - AT7456E
  • 5x UARTs (1,3,4,4,6,7)
  • 128 Mbit Dataflash chip 
  • Battery input voltage: 2S-8S
  • BEC 9V/3A - Optimized for DJI O3 Air unit
  • BEC 5V/2A 
  • 7x PWM Outputs (6 Motor Output, 1 LED)
  • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).
  • Mounting - 30 x 30mm, Φ4mm hole with M3 Grommets
  • Dimension - 37x37mm
  • Weight – 7g
  • JST-SH1.0_8pin port (For 4in1 ESCs)
  • JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX) 


Tekko32 F4 Metal 4in1 65A ESC 

F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / BLHELI32
The all new Tekko32 Metal is the first 4in1 ESC in the market to adapt the fast F4 MCU. Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response.


  • New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
  • PWM Frequency: 16k to 96k
  • Metal-cased MOSFET for excellent heat dissipation
  • Massive on-board capacitance for noise filtering at 2068uf
  • 3 oz copper PCB design to allow bigger current and better heat dissipation
  • Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

        Package Includes:

        • 1x  Kakute F4 V2 STACK
        • 1x  Electrolytic capacito: 1000uF 35v 
        • 1x  8pin to 8pin 1mm pitch 65mm cable
        • 1x  8pin to 8pin 1mm pitch 25mm cable
        • 1x  JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
        • 1x  JST SH 6pin 100mm cable(for Caddx HD Systems)
        • 1x  80mm SMA–MMCX Cable
        • 1x  JST GHR 4pin 150mm cable

        Laws and requirements regarding transmission of radio waves vary greatly across the world. In some countries, this product may not be legal. In the USA, the operator of this product is required by law to have a HAM amateur radio license, at the very least. It is the operator's responsibility to make sure that they are using this product in a legal manner, or not using it at all if not possible to do legally in their location. By adding this product to your cart, you are confirming that you have read this notice, and that Pyrodrone is in no way responsible for the actions of the operator while using this product.