HDZero AIO5 is the world’s first digital video AIO, enabling bind and fly 65mm whoops to weigh less than19.5g.

AIO5 integrates a F4 flight controller, HDZero 5.8GHz digital video transmitter, SPI 2.4GHz
ExpressLRS 3.0 receiver, DSHOT protocol 4-in-1 ESC, and a 5V/1A BEC. It is ideal for tiny whoop racing and freestyle.

The HDZero AIO5 is an excellent collaboration between Happymodel and HDZero. 

Check out all our Whoop Style AIO Flight Controllers and the rest of our HDZero Products! 

For Installation and Setup instructions please check the Setup Manual here

Specifications:

• MCU: STM32F411 (100MHz, 512K Flash)
  
• Gyro: BMI270
  
• On board voltage and amperage meters
  
• Built-in 5A(each) BLHeli_S 4-in-1 ESC
  
  • MCU: EFM8BB21
    
  • HV Current: 5A continuous peak 6A (3 seconds)
    
  • Factory firmware: O_H_5_48_V0.19.2.HEX
    
  • Dshot600 ready
    
• Built-in 5.8G HDZero VTX
  
  • RF output: 25mw/200mW
    
  • Supported channels: R1-R8, F2/F4, L1-L8
    
  • UFL connector (ultra-lite linear antenna included)
    
• Built-in SPI ExpressLRS 2.4GHz receiver
  
  • Packet rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
    
  • Pre-soldered enamel wire antenna
    
  • Telemetry output power: <12dBm
    
• Built-in 5V 1A BEC
  
• Flight controller firmware target: CRAZYBEEF4SX1280, configuration file??
  
• Power supply: 1S battery (2.5V – 4.35V)
  
• Fully compatible with the popular whoop frames
  
• Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size
  
• Weight: 5.7g(without motor plugs), 6.3g (with motor plugs)

Package Includes:

• 1 x HDZero AIO5 board
  
• 1 x Power cable with inverted angle A30 connector
  
• 4 x screws
  
• 4 x rubber grommets
  
• 1 x ultra-lite linear VTX antenna