Happymodel Mobula8 2S Digital HD (DJI O3) 85mm Micro FPV Whoop Drone - ELRS 2.4

Regular price $386.99 Sale

Availability: Available Unavailable

Product SKU: 47A-12034

Product Details

Here comes Mobula8 2S Digital HD FPV series with DJI O3, New CrazyF405 ELRS flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight in HD Quality Video.

    Check out our Micro Whoop Drones, our entire Happymodel Products and The Digital BNF/PNP/RTF Collection.

    Notice: DJI O3 air unit warranty service is undertaken by DJI according to their warranty policy, please noted. If you purchase this product you agree to this policy.


      • Digital HD FPV experience
      • New CrazyF405 ELRS HD flight controller
      • Powerful and Smooth
      • UART ExpressLRS receiver
      • Built-in blackbox for Gyroflow and PID Tune




      • Mode: EX1103 KV11000
      • Configu-ration:9N12P
      • Stator Diamter:11mm
      • Stator Length:3mm
      • Shaft Diameter:Φ1.5mm
      • Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
      • Weight(g):3.8g
      • No.of Cells(Lipo):1-2S



      • Weight:0.88g
      • Material: PC
      • Pitch:2.3inch
      • Props Dia:52.17mm
      • Center Thickness:5mm
      • Center Hole Dia:1.5mm


      Flight Controller

      • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
      • GYRO Sensor: BMI270  (SPI connection)
      • Mount hole size: 25.5mm*25.5mm
      • Power supply: 1-2S battery input (DC 2.9V-8.7V)
      • Built-in 12A(each) Blheli_S 4in1 ESC
      • Built-in Serial ExpressLRS 2.4G
      • Built-in BMP280 Barometer
      • Built-in 8MBp blackbox
      • Built-in voltage meter sensor , voltage meter scale 110
      • Built-in current meter sensor , current meter scale 470


      Onboard 4in1 ESC

      • Power supply: 1-2S LiPo/LiPo HV
      • Current: 12A continuous peak 15A (3 seconds)
      • Support BLHeli_S Bluejay firmware
      • Factory firmware: Bluejay ESC V0.19
      • Firmware target: Z-H-30
      • Default protocol: DSHOT300
      • When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200


      Onboard UART ExpressLRS 2.4GHz Receiver

      • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
      • RF Frequency: 2.4GHz
      • Antenna: enameled copper wire 31mm length
      • Telemetry output Power: <12dBm
      • Default firmware version: ExpressLRS V3.0.1
      • Firmware target: HappyModel EP 2400 RX
      • Could update firmware via ExpressLRS configurator

       ** If bound to radio but having trouble seeing stick movement in Betaflight, then you may need to turn off the "Model Match" factory setting in the ELRS web GUI.

      DJI O3 Air Unit

      • Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2
      • D-Cinelike mode for Vivid Colors
      • Flagship O3+ Video Streaming
      • Customizable Canvas Mode
      • 155° Super-Wide FOV
      • 1/1.7-Inch Sensor
      • Compact in Size


       Package Includes:

      • 1x Mobula8 Frame
      • 1x CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4
      • 4x EX1103 KV11000 brushless motor
      • 1x Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)
      • 1x DJI O3 Air unit
      • 1x Canopy(DJI O3/Walksnail/HDZERO optional)
      • 1x Screw driver

      Warranty Policy:

      If any defect, warranty, or troubleshooting needs should arise for this product, please be aware that Happymodel requires pilots to reach out to them directly. We must follow the policies set by this manufacturer in order to carry their products. Please make sure to contact them directly if you feel your HM product is defective in any way. If they are not able to help you fix the problem, then they will have us issue you a return shipping label to return the defect, and allow us to send you a replacement. Happymodel support email: info@happymodel.cn