Product Details
Are you tired of the power performance of the 1S whoop you own? Do you want more power to ripping and roaring in your backyard? Yes, here comes Mobula8, which is Happymodel’s first attempt on 85mm frame. It comes with X12 series flight controller, EX1103 KV11000 motor and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight.
Check out our Micro Whoop Drones and our entire Happymodel Collection!
Features:
-
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
-
VTX Power up to 400mw
-
ELRS V3.0 ( ELRS Version)
-
EX1103 KV110000 motors
-
CaddxFPV Ant FPV camera
-
Smooth and powerful
- Compatible for 1S-2S Lipo/LIHV battery
- 3D Printed Camera Lens Protector
Specifications:
Motor
-
Mode: EX1103 KV11000
-
Configuration: 9N12P
-
Stator Diameter: 11mm
-
Stator Length: 3mm
-
Shaft Diameter: Φ1.5mm
-
Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm
-
Weight(g): 3.8g
- No. of Cells(Lipo): 1-2S
Propellers:
-
Weight: 0.88g
-
Material: PC
-
Pitch: 2.3inch
-
Props Diameter: 52.17mm
-
Center Thickness: 5mm
- Center Hole Diameter: 1.5mm
Flight controller:
- X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
- X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
- X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
- X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689 or ICM42688P(SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) BLHeli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw
- Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
- Built-in voltage detection
- Built-in current sensor
Onboard 4in1 ESC:
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Firmware target: Z_H_30
- Default protocol: DSHOT300
- Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver:
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V2.0
- RF Frequency: 2.4GHz
- Antenna : SMD antenna
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Compatible with ExpressLRS V2.0 TX Module
- ExpressLRS firmware is updated Via Betaflight Firmware not ExpressLRS Configurator.
- To upgrade to ExpressLRS V3.0 update to Betaflight 4.4
Onboard Frsky SPI D8/D16 receiver Version:
- SPI BUS receiver Frsky D8/D16 compatible
- Compatible Non EU transmitter D8/D16 model Channels: 8ch/16ch
- No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support
Onboard Flysky SPI receiver Version:
- SPI BUS receiver
- Protocol: AFHDS-2A
- Channels: 14ch(AFHDS-2A)
- No ground interference ( Transmitter and receiver 1 m from the ground): 200 meter Failsafe support
External TBS CRSF Nano Receiver Version:
- Original TBS CROSSFIRE Receiver
- CRSF Protocol
- Official TBS transmitter compatible
PNP Version (without onboard receiver):
- Full UART1 for external Receiver
- Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
- IR1 pad(invert RX1) used for SBUS input
Onboard 5.8g OPENVTX:
- Firmware version: OPENVTX
- SmartAudio v2.1
- PIT Mode support
- RCE Mode support
- Channels: 37ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)
Caddx ANT 1200TVL Camera:
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Weight: 2g (N.W.)
Package Includes:
- 1 x Happymodel Mobula8 1-2S 85mm Analog Micro FPV Whoop Drone - Chosen Receiver
- 1 x Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW)
- 1 x Screw Driver
- 1 x Extra camera canopy
Warranty Policy:
If any defect, warranty, or troubleshooting needs should arise for this product, please be aware that Happymodel requires pilots to reach out to them directly. We must follow the policies set by this manufacturer in order to carry their products. Please make sure to contact them directly if you feel your HM product is defective in any way. If they are not able to help you fix the problem, then they will have us issue you a return shipping label to return the defect, and allow us to send you a replacement. Happymodel support email: info@happymodel.cn