Product Details
The Happymodel Mobula6 2024 1S 65mm Ultra Light Micro FPV Whoop comes equipped with a lightweight AIO flight controller and Serial ELRS receiver, as well as a 5.8G OpenVTX for optimal performance. With super light brushless motors, specifically SE0702 weighing only 1.46 grams, this product offers smooth and powerful flight capabilities. The FX17-B 1/3 CMOS 800TVL camera captures awesome footage, making it perfect for those looking for a professional and informative FPV experience. Compatible with both 1S lipo and LIHV batteries.
Check out our collection of Micro BNF/RTF/PNP Whoops and the rest of our Happymodel Products!
Specifications:
- Brand Name: Happymodel
- Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
- Wheelbase: 65mm
- Size: 81mm*81mm*37mm
- Weight: 17.7g
Motor:
- Mode: SE0702 KV28000
- Configu-ration:9N12P
- Stator Diamter:7mm
- Stator Length:2mm
- Shaft Diameter:Φ1mm
- Motor Dimension(Dia.*Len):Φ9.5mm*14mm
- Weight(g):1.46g
- No.of Cells(Lipo):1S only
Propellers:
- Materials: PC
- Inch: 31mm
- Pitch: 0.8 in
- Weight: 0.21g
- Mount hole diameter: 1mm
Flight controller:
- SuperX ELRS AIO 5-IN-1 Flight controller
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
- Sensor:BMI270(SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
- Built-in UART ExpressLRS v3.0.0
- Built-in voltage meter sensor, voltage meter scale 110
- Built-in current meter sensor, current meter scale 1175
Onboard 4in1 ESC:
- Power supply: 1S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: Bluejay v0.19.2
- Default protocol: DSHOT300
- Recommend ESC Startup power value to min1100/max1200
- Battery Connector: GNB A30 (Compatible with BT2.0)
Onboard Serial ExpressLRS receiver:
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V3.0
- RF Frequency: 2.4GHz
- Antenna : Enameled copper wire antenna
- Telemetry output Power: <12dBm
- Receiver protocol: Serial_based CRSF
- Compatible with ExpressLRS V3.x.x TX Module
- Could flash single ELRS receiver firmware by Wifi
- ExpressLRS firmware target: Generic ESP32 2.4Ghz RX and VTX
Onboard 5.8g VTX:
- Firmware version: OPENVTX
- MSP VTX
- PIT Mode support
- Channels:40ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)
- Antenna connector: U.FL
FX17-B Camera:
- Model:FX17-B
- Image Sensor: 1/3″ CMOS
- Horizontal Resolution: 800TVL
- FOV 150°
- Signal System: NTSC
- Net Weight: 1.5g
- Dimensions: L14mm*W14mm*H13mm
Package Includes:
- 1x Mobula6 2024 1S 65mm whoop Drone Frame +Canopy
- 1x SuperX ELRS AIO 5-IN-1 Flight controller
- 4x SE0702 KV28000 brushless motor
- 1x Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)
- 1x FX17-B 1/3 CMOS 800TVL camera NTSC 4:3
- 1x Onboard 5.8G 25mw~400mw VTX
- 1x Spare canopy
- 1x Propeller disassemble tool
- 1x Screw driver
Warranty Policy:
If any defect, warranty, or troubleshooting needs should arise for this product, please be aware that Happymodel requires pilots to reach out to them directly. We must follow the policies set by this manufacturer in order to carry their products. Please make sure to contact them directly if you feel your HM product is defective in any way. If they are not able to help you fix the problem, then they will have us issue you a return shipping label to return the defect, and allow us to send you a replacement. Happymodel support email: info@happymodel.cn