Product Details
GEPRC Happy to announce a new member of our family “ TinyGO” Ready To Fly Kit which is suitable for any novice from scratch and Indoor flight. Through a great number of tests, Better technical indexes and Good performance were obtained.TinyGO currently has two versions: the Indoor version and the 4K professional version. 4K can record 4K 60fps video.
Check out all our Analog BNF/PNP/RTFs, and the rest of our GEPRC Products!
TinyGO can use its own charger to charge. The charger uses the Type-C interface. You can use the movable power bank to charge as well. Using conveniently and quickly.
TinyGO can be flight more than 6 minutes (Depending on flight habits). Its stable electronic equipment and extremely strong and tough frame material make the FPV very stable and durable for crash. There is an EVA protection foam around the frame, More elastic and hard to damaged and deformed.
TinyGO is carefully assembled and assembles by GEPRC team, with excellent performance. You can start a whole new journey and enter into FPV World, TinyGO will be the best choice for your first FPV Drone.
This looked like the beginning of a terrific flight Experience Literally
Changelog
January 12, 2022:TinyGo shipped from today are the new remote controller, the new charger version.
December 16, 2022: VTX changed from 5.8G 25~200mW VTX to RAD Whoop 5.8G 400mw VTX.
December 16, 2022: The flight controller changed from GEP-12A-F4 to TAKER F411 8Bit 12A FC.
May 26, 2023: The remote controller changed from TinyRadio GR8 to TinyRadio ELRS 2.4G.
May 26, 2023: The flight controller changed from TAKER F411 8Bit 12A AIO without ELRS version to TAKER F411 8Bit 12A built-in ELRS version.
Configuration:
- Name: TinyGO
- Brand: GEPRC
- Frame: GEP-TG16
- Motor to Motor: 79mm
- FC: TAKER F411 8Bit 12A
- MCU: STM32F411
- IMU: 42688-P
- Blackbox: 16Mb
- OSD: BetaFlight OSD w/ AT7456E chip
- ESC: 8Bit 12A
- VTX: RAD Whoop 5.8G 25~400mw VTX
- Camera: Runcam Nano2/Caddx Loris 4K 60fps
- Propeller: GEMFAN 1636*4 (4 pairs)
- Motors: GR1102 10000Kv
- Receiver: Integrated ELRS SPI receiver
- TinyGO Racing Weight: 48 Grams
Remote Controller:
- TinyRadio ELRS 2.4G Remote Controller
- Radio Frequency: 2.4GHz
- Radio Frequency: 2.4GHz
- Range: 1000+ meter
- Channel: 8
- Transmit Power:<500mW
- Antenna interface : SMA
- Low Voltage alarm: <6.6v
- Batteries: 2 x 18650 Batteries (not included)
- TinyRadio ELRS Remote Controller
- Radio Frequency: 2.4GHz
- Radio Protocol: FHSS
- Channel: 8
- Transmit Power: < 20 dBm
- Antenna interface: SMA
- Low Voltage alarm: <6.6v
- Batteries: two 18650 batteries or a 2S battery.(not included)
FPV Goggle:
- Resolution: 800*480px
- Size of Screen: 4.3 inch
- Whole Size: 155mmx144mmx113mm
- In-built batteries: 3.7v/2000mAh
- Working Hours: 2.5 Hours
- Weight: 314.6 Grams
FPV Batteries:
- Batteries Capacity: 530mAh
- Voltage: 4.35v 1S1P
- Discharge rate: 90C
- Size:(61mmx16.7mmx7mm)
- Weight: 12.7 Grams
- Interface: PH2.0
Charger:
- Input power: 5v (USB & Type C)
- Full charged Voltage: 4.35v
- Output current: 500mAh
- Charging:It can charge 2 PCS 1s HV lipo 4.35v HP2.0/GNB27 plug batteries at the same time
Package Includes:
- 1 x TinyGO TinyWhoop
- 1 x TinyRadio ELRS 2.4G Transmitter
- 1 x GEPRC FPV RG1 Goggle
- 4 x GEPRC LiHV 4.35v 90C Battery
- 1 x Battery strap
- 4 x Gemfan 1636*4 Props(pairs)
- 1 x GEPRC Fly bag
- 1 x Screwdriver