Product Details
Darwin FPV "cement" ultra-durable waterproof stack is the top stack launched by the Darwin team for professional pilots. It completely solves the industry problem of poor reliability of fpv drones, allowing you to fly in any environment and greatly improving the fun of flying. Satisfy your various creative inspirations!
We have introduced many novel features on this stack, such as canceling all the easy-to-loose direct socket interfaces, canceling the traditional heat dissipation shell with low thermal conductivity, adding waterproof and impact-resistant treatment with glue filling, and adopting the ultra-high current MOS bus technology has added more than 10 core hardware protections, such as soft start protection circuit, anti-reverse connection, anti-short circuit and anti-overcurrent circuit, to ensure stability and reliability in extreme environments. And keep the product size and weight almost the same as ordinary stack, without affecting your installation compatibility and flying feel.
Check out all our 30x30mm Electronic Speed Controllers and the rest of our DarwinFPV Products!
Features:
- IP67 dust and waterproof rating, capable of withstanding immersion in 0.5 meters of water for 30 minutes without harm.
- All products in the series are crafted using the highest-grade components, providing you with an unparalleled experience and top-tier enjoyment.
- Multiple protections including soft-start protection, reverse connection protection, short circuit overcurrent protection, and over-temperature protection ensure double the safety.
- 128KHz dynamic PWM output for finer throttle control
Specifications:
- MCU: 32-bit F4 with a main frequency of 120MHz, supporting a maximum PWM Packet Rate of 128KHz
- Continuous/Peak Current: 100A x 4/120A x 4 (continuous 100A requires a water-cooling environment)
- Supported Throttle Signals: Dshot150/300/600/1200, MultiShot, Oneshot42, Oneshot125
- Weight: 23.0g ± 0.2g (excluding capacitors and power cords)
- Current Sensor: Supported (current meter scale: 125)
- Application: Suitable for 5-10 inch FPV Drones
- Dimensions: 36.8mm x 42.5mm x 7.5mm
- Mounting Hole: 30.5mm x 30.5mm
- Power Cord: 14AWG, 120mm long
- Firmware Name: DARWIN_F4_60
- Input Voltage: 3-6S LiPo
- Power Plug: XT60
Package Includes:
- 1 x 14AWMG power cable with a length of 120mm (soldered to the ESC)
- 4 x M3*6.6MM shock-absorbing balls (installed on the ESC)
- 1 x 35V/1000uF electrolytic capacitor (soldered to the ESC)
- 1 x DarwinFPV Cement 100A 32bit ESC
- 1 x 30mm ESC cable (8P)
- 1 x Sticker
- 1 x XT60
