CNHL Ultra Black Series 1550MAH 14.8V 4S 150C Lipo Battery - XT60
All products with batteries must be shipped by a ground shipping method.
CNHL 4s Ultra Black series is designed for FPV drone racing. Higher energy density, lower internal resistance, higher discharge rates, and a longer life cycle. Wrapped in a black and clear protective shrink with foam padding
CNHL 1550mAh 4s lipo battery fit for FPV Drone Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250, Nemesis 240 Mini, HOVERSHIP MHQ2 (270), ZMR 250, Mini H, QAV250, QAV180 /210, Danaus, Vortex 285, FLIP FPV FRAME, HOVERSHIP MHQ2, etc..
Check out all our 4S Batteries and the rest of our CNHL Products!
Specifications:
- Capacity: 1550mAh
- Voltage: 14.8V / 4-Cell / 4S1P
- Discharge Rate: 150C Continual / 300C Burst
- Charge Rate: 5C Max
- Size: 31*39*78mm
- Weight: 171g
- Output Connector: XT60
- Balance Connector: JST / XH
- Wire Size (AWG): 12#
Notice:
- For the RC battery, only if the voltage and the plug match, then it will fit.
- Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
- To double make sure safe, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
- If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.
Package Includes:
- 1 x Pack CNHL Utra Black 1550mAh 14.8V 4S 150C Lipo Battery with XT60 Plug
Battery Disclaimer:
Li-Po and Li-Ion batteries must be cared for properly when stored, and NEVER charged, balanced,
or discharged unattended.
ALWAYS be in the same room within line of sight of charging or discharging batteries.
NEVER charge or discharge batteries on a flammable surface.
Failure to follow these instructions may result in fire, personal injury, and/or property damage.
By purchasing this battery, you agree that Pyrodrone and the battery manufacturer are in no way responsible
for consumer battery charging and care, or any of the risks associated with Li-Pos or Li-Ions.