BetaFPV LiteRadio 2 SE RC Transmitter - ELRS 2.4G

Popular ExpressLRS 2.4G raido link protocol version is available for option now. Besides, this version supports BETAFPV Configurator which is a utility disigned to simply updating, configuring and tuning the radio controller.

Check out all our Radios and the rest of our BetaFPV Products!

LiteRadio 2 SE Radio Transmitter is the upgraded version based on LiteRadio 2 and comes with huge improvements.

• Built-in 1000 mAh 1S battery, LiteRadio 2 SE increases the endurance to 8 hours.
• Updates with BETAFPV self-developed LiteRadio System. Pilots can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter.
• Supports the Frsky / Futaba / Bayang, pilots can easily change Futaba, Frsky D8, Frsky FCC D16, and Frsky LBT D16 mode via the radio transmitter.
• Comes with 100mW transmitting power, LiteRadio 2 SE brings a wider operating range.

Please kindly note: D16 (FCC&LBT) protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers.

Bullet Point

• LiteRadio 2 SE upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
• Equipped with a built-in 1000 mAh 1S battery, LiteRadio 2 SE can use up to 8 hours, bringing an excellent endurance performance. 
• Comes with a built-in charging module, LiteRadio 2 SE can support USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged(when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly. 
• Compared with the LiteRadio 2, LiteRadio 2 SE has a larger transmitting power that can reach 100mW, bringing a wider operating range.
• Adopted the rubber coat, LiteRadio 2 SE is ergonomic and has the shape of a gaming controller. It's comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
• This radio transmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
• LiteRadio 2 SE transmitter has been equipped on the Ready-to-Fly FPV whoop racing advanced kit 2 and FPV whoop racing starter kit 2. It is one of the easiest ways to get into the FPV hobby.

Specification

• Item: LiteRadio 2 SE
• Color: White
• Frequency Range: 2.4G (2403MHz-2447MHz)
• 2.4G System: NRF24L01 / CC2500 / SX1280
• Channel: 8
• Support Protocol: ELRS 2.4GHz v3.x.x
• Power: ≤100mw
• Adapted Drone Type: Multirotor
• Support USB Charging / Firmware Update
• Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
• LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
• Battery: Built-in 1000mAh 1S Battery
• Charging Connector: USB 3.0 Type-C

Diagram of LiteRadio 2 SE

FAQ

• Manual for LiteRadio 2 SE Radio Transmitter
• How to replace the gimbals of Literadio 2 SE？
• BETAFPV V2.0.X firmware for Literadio 2 SE. The V2.0.1 version for ELRS supports adjustable joystick dead zone.
• For any questions about joystick calibration of the Literadio 2 SE transmitter, please watch the following videos to know more.

Package Includes:

• 1 * BetaFPV LiteRadio 2 SE RC Transmitter - ELRS 2.4G
• 1 * User Manual
• 1 * USB Type-C Cable