Skip to content
FREE SHIPPING ON ORDERS OVER $199
FREE US SHIPPING OVER $199

Walksnail Digital HD Mini 1S VTX/Camera Kit for Walksnail Avatar HD Goggles

SKU H3-11349
Availability:
in stock
Original price $139.99 - Original price $139.99
Original price
$139.99
$139.99 - $139.99
Current price $139.99



Introducing the Mini 1S VTX/Camera kit for the new HD Avatar FPV system from Walksnail. Now you can fly your tiny whoops on in full HD glory without having to sacrifice flight performance due to the added weight! 

July update: VTX (V2) changed to Mini VTX V3 (the parameters are the same)

Don't forget to check out the rest of our Video Transmitters and Walksnail Products!!

1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.

6.8g light weight board
The Avatar mini 1S VTX weights only 6.8g and fits perfectly with the 75X quad.

22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.

32G Built-in Storage
The Avatar mini 1s vtx comes with 8g built-in storage,it can record 1080p
with 60fps or 720pwith 100fps/60fps HD flight videos without interference.

Features:

  • 1080P/60fps
  • 22ms low latency
  • input 3.1V-13V
  • Power 500mW
  • Built-in 32G storage
  • 6.8g light weight

Specifications:

Camera

  • Model Avatar nano
  • Image Sensor 1/2.7”1nch
  • Resolution 1080P/60fps,720P/120fps,720P/60fps
  • Ratio 16/9 4/3
  • Lens 2.1mm
  • FOV 170°
  • Aperture F2.0
  • Shutter Rolling shutter
  • Min.Illumination 0.001Lux
  • Weight 3.5g
  • Dimensions 14*14*17mm
  • Coaxial Cable 55mm(default)/90mm

VTX

  • Model Avatar mini 1s module
  • Communication Frequency 5.725-5.850GHz
  • Transmitter Power (EIRP) FCC:<25.5dBm; CE:<14dBm;
  • SRRC:<20dBm; MIC:<25dBm
  • I/O Interface JST1.0*6(Power in)JST0.8*4(USB)
  • Mounting Holes 25.5*25.5mm
  • Dimensions 30*30*6.5mm
  • Storage 8G(v2) / 32G(v3)
  • Recording 1080p/720p
  • Weight 6.8g
  • Operating Temperature -20-40℃
  • Channels 8
  • Wide Power Input 3.1V-5V(V2) / 3.1V-13V(V3)
  • Supported FC System Betaflight; Inav; Fettec; Kiss; ArduPliot
  • OSD Canvas mode
  • Bitrate 25mbps 50mbps
  • Latency Average latency 22ms
  • Antenna IPEX

VTX Antenna

  • Model Polar antenna
  • Polarization LHCP
  • Bandwidth 5.6GHz-5.9GHz
  • Average Gain 2dBi
  • Radiation Efficiency ≥98%
  • VSWR ≤1.4
  • Connector U.FL
  • Line Length 90mm
  • Dimension H105mm*R11.2mm
  • Weight 1.5g

Package Includes:

  • Avatar Mini 1S KIT X1
  • 4 Pin USB Cable X1
  • 6 Pin Power Cable X1
  • M2x3/4mm Screws X2
  • M2x16mm Screws X4
  • M2 Screw nut X4
  • 2.1x3.4x1mm Gasket X5 

    Laws and requirements regarding transmission of radio waves vary greatly across the world. In some countries, this product may not be legal. In the USA, the operator of this product is required by law to have a HAM amateur radio license, at the very least. It is the operator's responsibility to make sure that they are using this product in a legal manner, or not using it at all if not possible to do legally in their location. By adding this product to your cart, you are confirming that you have read this notice, and that Pyrodrone is in no way responsible for the actions of the operator while using this product.


    Overall rating: 4.7058825 / 5 from 17 reviews.

    AI Generated Review Summary

    Summary topics

    Review topics: ["vtx"].

    Review highlights

    Reviews

    nice

    "works great for my tinywhoop betafpv pavo pico, runs 2s fine so far no issues. great feed and clear !!!!!!!"

    — Jordan J. (5/5)

    Don't run this on 3s

    "Don't run this on 3s. Died after 10 flights. Unplugged one battery and plugged in a new one and it died. Apparently, the voltage regulator can barely handle 3s and a freshly charged battery can put it over the edge."

    — Steve (2/5)

    The best option for 75mm-85mm digital FPV

    "These things rock, they're light and perform fantastically. I'd knock a star off but I crash them pretty hard so I'm not surprised they break."

    — Jonathan T. (5/5)

    BEST FOR WHOOPS

    "After using this I cant go back to analog"

    — John B. (5/5)

    Great Camera for micros

    "The walksnail 1s is a great camera for micros. Great for larger 2s builds and small and tight 1s builds."

    — Henry M. (5/5)

    1s v3 kit love it.

    "1s v3 kit love it."

    — Ricky M. (5/5)

    Great small HD VTX

    "Perfect for for 3.5""

    — William J. (5/5)

    Not bad!

    "The new v3 is way better than the old one. I like that it now goes up to 13 volts. It also goes up to 500mw and has 32gb built in storage. Not that it matters because it still has the cheap little plug."

    — Seth C. (5/5)

    1s vtx

    "Great Vtx. Whoops to 3-3.5s"

    — Donavon C. (5/5)

    Great picture, reasonably light

    "Not as light as the HDZero board but much better picture"

    — Todd C. (5/5)

    Q&A

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare