The SPAN F722-BT-HD v2 stack is specially designed for DJI Air Unit, plug and play, is a flight tower system with F722 chip flight controller and BLheli_32 50A 96K 4 in 1 32-bit ESC, equipped with 42688 -P gyroscope, integrated 512MB on-board SD card and on-board Bluetooth parameter tuning. So as to have a more delicate flying experience.

The SPAN F722-BT-HD v2 flight controller supports direct plug-in the DJI Air Unit, which can save the trouble of soldering. The upgrade of the type-C USB connector greatly improves the life of the socket and reduces the risk of poor contact.

F722-BT-HD v2 flight controller can be well matched with BLheli_32 50A 96K 4-in-1 32-bit ESC. It can be used together to achieve perfect flight effect.

The flight controller supports various receivers, including Sbus, PPM, CRSF, DSMX, iBus, DUMD and other protocols, so don’t worry that the remote controller in your hand cannot be used.

N.B: The stack is mainly used on the GEPRC MARK5 Drone, Other frames with 30.5*30.5 FC mounting holes can also use this stack.

Check out all our 30x30mm Stacks and the rest of our GEPRC products.

Features:

Using mainstream STM32F722RET6 main control
Equipped with the latest 42688-P gyroscope
Support Bluetooth parameter tuning
512MB on-board SD card
Integrated LC filtering
Upgraded type-C USB connector
Direct plugging into DJI Air Unit
Combined with BLHeli_32 50A 96K 4IN1 ESC to achieve silky smooth flight experience
Simple and reasonable installation method, shock absorption ring can make the gyroscope work stably
Support major receivers: Sbus, PPM, CRSF, DSMX, iBus

Specifications:

Model: SPAN F722-BT-HD v2 flight controller

MCU: STM32F722RET6
IMU: 42688-P(SPI)
Black Box: 512MB onboard SD card
USB Connector: Type-C
OSD: BetaFlight OSD w/ AT7456E chip
BEC Output: 5V 3A / 12V 3A
Integrated LC filtering
Firmware: GEPRCF722-BT-HD
Size: 36x36mm, φ4mm hole becomes φ3mm after using silicone grommets
Input Voltage: LiPo 3-6S
UARTS: 5

Model: BL32 50A 96K 4IN1 ESC

MCU: SMT32G071 (32bit 96K Hz)
Continuous Current: 50A
Peak Current: 55A (5 seconds)
Galvanometer: Support
Telemetry: Support
Supported Protocols: DSHOT600, PWM, Multishot, OneShot
Firmware: GEPRC_G071_4IN1_96K
Input Voltage: 3-6S Lipo

Package Includes:

1 x Flight Controller
1 x ESC
1 x Capacitor
1 x DJI Air Unit Adapter Cable
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x M3*30 Screws
4 x M3*24 Screws
8 x Nylon nuts
4 x Silicone grommets

GEPRC SPAN F722-BT-HD V2 Stack with BLheli32 50A 4in1 ESC - 30*30mm