The Speedy Bee F405 WING APP Fixed Wing Flight Controller is the perfect choice for FPV fixed-wing pilots. This controller is equipped with STM32 F405 MCU for faster and smoother performance, an ICM-42688-P IMU, 6 UARTS, and Bluetooth connectivity. With additional features like an OSD, barometer, and onboard RGB battery indicator, this controller is sure to provide an optimal flying experience.
Here You can order the The PDB Board seperately.
Check out all our Fixed Wing Flight Controllers and the rest of our SpeedyBee Products!
Specifications
SpeedyBee F405 WING FC board | |
MCU | STM32F405,168MHz,1MB Flash |
IMU(Gyro&Accelerometer) | ICM-42688-P |
Barometer | SPL006-001 |
OSD Chip | AT7456E |
Blackbox | MicroSD Card Slot |
UART | 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection)) |
I2C | 1x Used for magnetometer, digital airspeed sensor |
ADC | 4x (VBAT, Current, RSSI, Analog AirSpeed) |
PWM | 12x (11+1“LED”pad) |
ELRS/CRSF receiver | Supported,connected to UART1 |
SBUS | Built in inverter for SBUS input (UART2-RX) |
LED | 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB |
RSSI | Supported,Named as RS . |
Supported FC Firmware | INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING |
Weight | 8.9g |
SpeedyBee F405 WING PDB board | |
Input voltage range | 7~36V (2~6S LiPo) |
Battery Voltage Sensor | Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot) |
Battery Current Sensor | 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot) |
TVS Protective diode | Yes |
FC BEC output | Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip |
VTX BEC output | Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera. |
Servo BEC output | Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos. |
Weight | 11.4g |
SpeedyBee F405 WING Wireless board | |
Wireless Configuration (long press BOOT button for 6 seconds to switch modes) | BLE mode, connect to Speedybee APP |
Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc. | |
Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner | |
LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) | 4x WS2812 LED strip connectors, adjustable colors and flashing modes |
Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads | |
On-board battery level indicator | 4x RGB indicator LED for battery level display by number of lights |
Weight | 4.2g |
Package Includes:
- 1 x SpeedyBee F405 Wing APP Fixed Wing Flight Controller