Skystars RC flagship H743 Flight Controller with X8 support, OSD, BMI270 gyro, BMP280 barometer, 16M blackbox, 8 UARTS, and more. The powerful MCU running at 480MHz should future-proof any new firmware updates coming in the next few years.

The Skystars RC KO60 BL32-60A 4-In-1 ESC adopts some of the best PCB materials and production processes. The board applies the use of high TG materials, 3oz copper PCB & 2μm gold deposition process, and 6-layer layout design of board, allowing it to withstand higher current. With 24 high-quality 5x6 MOSFETs and the latest BLHeli_32 firmware, 128K PWM output, and more, this ESC provides some of the best performance available.

Check out all our Stacks and the rest of our Skystars Products!

Flight Controller Specifications:

MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
Gyro: BMI270
Baro: BMP280
OSD: AT7456E
Blackbox: 16M
8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
8x PWM outputs
1x I2C
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
USB Type-C(USB2.0)
2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
Dual Camera Inputs switch
VTX 10V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART
Vbat Input: 7~25V (2~6S LiPo)
BEC: 5V 2A Continuous (Max 3A)
LDO 3.3V: Max 250mA
Firmware: Betaflight - SKYSTARSH7HD
Mounting: 30.5 x 30.5mm
Dimensions: 39.5 x 39.5 x 7.8 mm
Weight: 10.1g

KO60 ESC Specifications:

Mount: 30.5mm x 30.5mm
Supports 3-6S
ESC weight: 14.1g
Continuous current: 60A
32-bit ARM Cortex MCU 32F051 48MHz Processor
Telemetry: YES
Current Sensor: YES
Drive signal: DSHOT150, DSHOT300, DSHOT600 / Proshot1000 / Oneshot / Multishot
PWM: Up to 128K
Firmware: BLHeli_32
BEC: No

Package Includes:

Skystars H7 Single BMI270 Gyro Flight controller and KO60 60A Blheli-32 ESC Stack - 30x30mm

Skystars H7 Single BMI270 Gyro Flight controller and KO60 60A Blheli-32 ESC Stack - 30x30mm