Product Details
SKYSTARS F7 F722 Flight controller and 60A Blheli-32 32bit ESC fly tower stack
Check out all our Stacks and the rest of our Skystars Products!
Specifications:
- Flight control: MCU: STM32F722RGT6 216MHz
- Gyroscope: MPU6000
- OSD: Betaflight SPI OSD DJI HD OSD(UART6)
- Serial port: UART 1/2/3/4/5/6
- BEC: 5V 3A 10V 3A dual-channel BEC supports stable power supply on the sky side of DJI
- Input voltage: 3-6S
- Black box: 8MB
- Using firmware: SKYSTARS F7HD
- LED: 4 LED independent pads, support WS2812 programming lamp output.
- Receiver: Support Sbus, crsf, ibus, Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX built-in inverter, support
- 3.3v Spektrum satellite receiver, support PPM receiver, The default receiver input is UART1, but F7 has a built-in inverter, which can actually be installed in any spare UART.
- Installation size: 30.5mm ¡Á 30.5mm The installation hole is M4 and supports shock column installation
- External size 39mm ¡Á 39mm
- Flight control weight: 6.9g
- Flight control onboard voltage sensor.
60A ESC:
- The installation size is 30.5mm ¡Á 30.5mm. The installation hole is M4.
- ESC weight: 12g
- ESC onboard current sensor.
- Continuous current: 60A
- Instantaneous current [5 seconds]: 65A
- Drive signal: Dshot300-1200 / Proshot1000 / Oneshot / Multishot / PWM
- MCU: STM32F051 Operation frequency: 48MHz
- Firmware: BLheli-32
- MOS tube model is NVMFS5C430L
- The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
Note: There is no difference in appearance between the 45A and 60A ESCs, which can be distinguished from the MOS tube.
Wiring Diagram
