iFLIGHT TITAN XL5 HD W/Air Unit/DJI Camera & GPS - Choose Power & RX

The TITAN XL5 w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. Equipped with iFlight's latest SucceX-D F7 (50A 4-in-1 ESC) Stack and the popular XING motors. Everything you need  just bind-and-fly!

Check out the Variable GoPro TPU Mount for this frame.

After our popular TITAN DC5 (DeadCat style frame) approach we decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle. 

DJI HD FPV Goggles can be found HERE!
Checkout all our BNF/RTF drones and our full collection of iFlight products!

For replacements checkout the iFlight Titan XL5 and parts section

Recommended batteries:

• 4S 1300-1600 range
• 6S 1150-1300 range

HIGHLIGHTS:

• - 6mm arm design for more durability
• - XING 2208 motors for more power
• - GPS pre-installed for more safety at distance
• - 360° TPU protection and Antenna mounts

PRE-TUNED & PRE-SETUP:

• - Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
• - GPS-rescue mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)
• - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
• - Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!

FRAME // TITAN XL5：

• - Weight ：145g
• - Wheelbase: 250mm
• - Main body dimension: 185*133mm
• - Bottom to top distance: 30mm
• - Arm thickness: 6mm
• - Bottom plate thickness: 2mm
• - Top plate thickness: 2mm
• - Camera plate thickness: 2mm (2.5mm included TPU inserts)

ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC)：

• - Universal USB Type C connector instead of micro USB
• - Plug-and-Play DJI support. No need to solder tiny wires!

SucceX-D F7

• with 216MHz STM32F722 with 2x ICM20689 Gyros ready for SensorFusion.
• Up to 8S, Barometer, 32MB Blackbox Flash and 5V/9V to power all you might need.

SucceX 50A 4in1

• with BLHeli_32 up to 48kHz, 8 layers double-sided PCB and Top grade Mosfets.

BNF // Parts list (Build)

• 1 x TITAN XL5 HD Frame
• 1 x DJI Air Unit and DJI Camera
• 2 x Albatross LHCP RP-SMA 5.8g antenna
• 1 x TPU Bracket for DJI Air Unit Module
• 1 x TPU Antenna holder for DJI antenna
• 2 x TPU camera side plate soft mount
• 1 x TPU lens cover
• 1 x iFlight Lipo Strap 
• 2 x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
• 4 x XING 2208 Motor Unibell（4S 2450KV，6S 1800KV）
• 1 x SucceX-D F7 Flight Controller
• 1 x SucceX BLHeli32 50A 4-in-1 ESC 2-6S
• 2 x MMCX to RP-SMA Female Adapter Cable
• 1 x GPS Module