Learn FPV!
FPV made simple!
4.9 / 5.0
122 Reviews
Due to high demand we brought the Pyrodrone staggered race wires back with added LEDs.Available in 25mm and 35mm to fit almost every frame on the m...
View full details4.9 / 5.0
151 Reviews
Due to high demand we brought the Pyrodrone staggered race wires back with added LEDs.Available in 25mm and 35mm to fit almost every frame on the m...
View full details4.9 / 5.0
169 Reviews
Finally a Tool Kit with your favorite colors and Brand name :-) Check out the rest of our Tools and Building Supplies Collection! Kit includes: 1 ...
View full details4.9 / 5.0
141 Reviews
This is the Pyrodrone version of the Source ONE V3 frame.We used the same high quality carbon and manufacturer as our Floss 3.0 and Floss 3.0 Lite ...
View full details4.9 / 5.0
46 Reviews
This lightweight FC/PDB stack cover made out of glass fiber will make your built super clean.Has the standard mounting holes 30.5mm x 30.5mm that w...
View full details4.9 / 5.0
58 Reviews
This set of 4 M3 anti-vibration flight controller standoffs is a great solution to any flight controller vibration woes.Also available in 2mm versi...
View full details4.9 / 5.0
39 Reviews
This lightweight FC/PDB stack cover made out of glass fiber will make your built super clean.Has the micro stack mounting holes 20mm x 20mm.Can be ...
View full details4.8 / 5.0
13 Reviews
The most anticipated prop in the micro world.Material: PCLenght: 65mmMounting: 1.5mm Package includes: 5 Sets (5 x CW BLUE , 5 x CCW BLUE , 5 x CW ...
View full details4.8 / 5.0
74 Reviews
New updated Pyro-Drone prop tool. Lighter, more affordable and exchangeable Steel 8mm socket tip. Available in both Pyro Orange and Pyro Blue! Don'...
View full details4.7 / 5.0
27 Reviews
If you use crossfire or similar other setups where you don't need the "bunny" antenna mount then this is the perfect video antenna mounting solutio...
View full details5.0 / 5.0
46 Reviews
It's finally here!The pyrodrone F4 board has been one of the very few boards with perfectly flat one side which lot of guys been utilizing as a "sh...
View full details4.9 / 5.0
39 Reviews
Package includes: 1 x 16mm x 250mm Battery strap with Pyrodrone logo NON slip surfacesize: 16mm Width x 250mm LengthWeight: 4 GramsWorks great with...
View full details4.9 / 5.0
40 Reviews
This is a must tool for every FPV pilot.Perfect for cutting and stripping wires.This wire cutter is also included in our Pyrodrone tool kit.Attn. T...
View full details4.9 / 5.0
23 Reviews
Say no to vibes! These lil guys will do the job to keep the vibes out of your stack just like their bigger brother.Perfect for all your micro 20x20...
View full details4.9 / 5.0
16 Reviews
This is the 1mm hub version of the most anticipated prop in the micro world.Material: PCLenght: 65mmMounting: 1mm Package includes: 5 Sets (5 x CW ...
View full details5.0 / 5.0
7 Reviews
Package includes: 1 x 16mm x 250mm Battery strap with Pyrodrone logo NON slip surfacesize: 16mm Width x 250mm LengthWeight: 4 GramsWorks great with...
View full details4.7 / 5.0
14 Reviews
This sma mount will fit Floss 2 and Floss 2.1 frames.Compatible with any 31mm spaced standoffs.Weight: 2.5 Grams
4.9 / 5.0
20 Reviews
If you use crossfire or similar other setups where you don't need the "bunny" antenna mount then this is the perfect video antenna mounting solutio...
View full details4.5 / 5.0
4 Reviews
Replacement arm for the Floss 3.0 Package includes: 1 x 4" replacement arm for Floss 3.0 (5mm Thickness) Weight: 7.7 Grams
5.0 / 5.0
3 Reviews
The Pyrodrone Ceramic Tip Reverse Tweezer Set allows for precise and efficient soldering with its heat-resistant ceramic tips and reliable reverse ...
View full details5.0 / 5.0
4 Reviews
Hi quality 3K 50mm Carbon Fiber Spare Arms For The Hyperlite Floss 2.0 6" Race Frame. Fits 22XX motors If you switch from 4mm to 5mm arms, you wi...
View full details5.0 / 5.0
2 Reviews
Pyro-Drone 5G8 Linear Antenna With SMA Connector (6 cm )
5.0 / 5.0
5 Reviews
These Pyrodrone Angled Tweezers are essential for any FPV drone builder. With their fine tips, you can easily grab even the smallest objects, makin...
View full details5.0 / 5.0
2 Reviews
Package includes :1 x 2mm Bottom bracket will work with both 5" and 6" versions
5.0 / 5.0
1 Review
Package includes 1 x Top plate
4.7 / 5.0
3 Reviews
Simplify your soldering tasks with the Pyrodrone Work Station. The metal base, magnetic arms with alligator clips, adjustable PCB posts, and LED ma...
View full detailsThese Session mounts are made for the Hyperlite Fairy and Flowride Floss frames. They have 27mm wide front mounting bolts and a single center bolt ...
View full details5.0 / 5.0
1 Review
Pyro-Drone 5G8 Linear Antenna With SMA Connector (5cm )
These Pyrodrone Pointed Tip Tweezers are essential for any FPV drone builder. With their fine tips, you can easily grab even the smallest objects, ...
View full detailsThese Pyrodrone Blunt Tip Tweezers are essential for any FPV drone builder. With their fine tips, you can easily grab even the smallest objects, ma...
View full details5.0 / 5.0
2 Reviews
High quality 3mm carbon fiber spare main plate for the HyperLite Floss Works with 4", 5" and 6" Frames
5.0 / 5.0
2 Reviews
Spare 2mm carbon fiber top plate for HyperLite FlossWorks with 4", 5" and 6" Frames
Everything you need to assemble a Hyperlite Floss 2 Frame!Package includes: 4 x m3x25mm 12.9 Screws 4 x m3x20mm 12.9 Screws 4 x m3x14mm 12.9 Screws...
View full details$99.00 away from free shipping!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}