HappyModel BNF Mobula 6 1S Micro Whoop Quadcopter (Choose RX & Version)
With one of the best nano cameras, the Caddx ANT and significantly lighter than its competitors Mobula 6 is a serious contender in the whoop racing scene.
Available in 2 different KV options
25000KV for crazy fast races
19000KV for great all around performance and racing
Check out our Mobula 6 and Parts collection!
Specifications
Crazybee F4 LiteFlight Controller
Built-in ESC & Receiver & VTX
- (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
- (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM 42688P
- Board size: 28.5 * 28.5MM
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- Built-in SPI Frsky/Flysky receiver
- Built-in 5V 1A BEC
- Built-in voltage detection
Onboard Frsky Receiver Version
- SPI BUS receiver Frsky D8 compatible
- Compatible Non EU transmitter D8 model
- Channels: 8ch
- Failsafe support
- No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Onboard Flysky Receiver Version
- SPI BUS receiver
- Protocol: AFHDS and AFHDS-2A Switchable
- Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
- No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
- Failsafe support
Onboard 5A BLheli_S 4in1 ESC
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_REV16_7.HEX
- Default protocol: DSHOT600
SE0802 19000KV / 25000KV Motor
- Model: SE0802
- KV: 19000KV / 25000KV Motor
- Configu-ration:9N12P
- Stator Diamter:8mm
- Stator Length:2mm
- Shaft Diameter:Φ1mm
- Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
- Weight(g):1.9g
- No.of Cells(Lipo):1S only
Gemfan 1219 3-Blade Propeller Brand Name: Gemfan
- Center Thickness:5mm
- Prop Disk Diameter:31mm
- Center Hole Inner diameter:1.0mm
- Quantity: 4 CW & 4 CCW
- Weight:0.28g
Onboard 5.8G 40CH 25mW VTX Output power: 25mw
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz 5bands 40 channels
- With Race band
- Smartaudio ready
Caddx ANT Camera
- Day/Night: Color
- Housing Material: ABS
Lipo Battery ( Included)
- Continuous Discharge Rate: 30C
- Size: 57mmx12mmx7mm
- Weight: 8g
- Connector: PH2.0
- Quantity: 4 PCS
Includes
- 1x Happy Model Mobula6 1S FPV Racing Drone
- 4x 1S 300mAh 30C Lipo Battery
- 1x 1S Lipo/LIHV USB Charger
- 1x Propeller disassemble Tool
Warranty Policy:
If any defect, warranty, or troubleshooting needs should arise for this product, please be aware that Happymodel requires pilots to reach out to them directly. We must follow the policies set by this manufacturer in order to carry their products. Please make sure to contact them directly if you feel your HM product is defective in any way. If they are not able to help you fix the problem, then they will have us issue you a return shipping label to return the defect, and allow us to send you a replacement. Happymodel support email: info@happymodel.cn