Matek F405-TE Flight Controller - 30x30mm

The MATEKSYS F405-TE Flight Controller features a 30.5 x 30.5mm mounting pattern and weighs 10g. It features a Barometer, Micro SD Slot, 6x UARTS, 11x PWM outputs, 9-36V DC IN (3-8S LiPo), 220A Current Sensor, BEC 12V 2A, 5V 1.5A and Dual analog camera signal inputs.

Check out all our Flight Controllers and the rest of our Matek Products!

Flight Controller Specifications

• PWM Outputs: 11x PWM outputs (8x Dshot compatible with BF/ArduPilot)
• Pads: 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
• UARTS: 6x UARTs, 1x Softserial_Tx option(INAV/BF)
• ADC: 4x ADC (VBAT, Current, RSSI, Airspeed)
• Built-in inverter: UART2-RX for SBUS input
• ESC: 4x individual ESC power/signal pads
• Camera: Switchable Dual Camera Input
• MCU: 168MHz STM32F405RGT6
• Blackbox: MicroSD slot (SPI)
• Dimensions: 36 x 46 mm
• IMU: ICM42688-P (SPI)
• Baro: SPL06-001 (I2C)
• PINIO: 1x spare PINIO
• OSD: AT7456E (SPI)
• Weight: 10g

Flight Controller Firmware:

• BetaFlight: MATEKF405TE
• INAV: MATEKF405TE_SD
• ArduPilot: MatekF405-TE

PDB Specifications:

• Battery Voltage divider: 1K:20K (INAV scale 2100, BF scale 210, ArduPilot BATT_VOLT_MULT 21.0)
• Current Senor: 220A, 3.3V ADC (INAV/BF scale 150, ArduPilot 66.7 A/V)
• PDB: 4x 35A (Max.4x 50A)
• Input: 9~36V (3~8S LiPo)
• LDO 3.3V: 200mA
• BEC: 5V 1.5A
• BEC: 12V 2A

Physical Specifications:

• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
• Dimensions:  36 x 46 mm
• Weight: 10g

Includes

• 1 x Matek F405-TE Flight Controller - 30x30mm
• 6 x silicon grommets M4 to M3
• 1 x Rubycon ZLH 35V/470uF (Low ESR)