Product Details
The iFlight Blitz Whoop 2.5W VTX is a great choice for the Long Range guys or for those who need high power VTX to fly in video power demanding locations.
Equipped with a built-in microphone, this VTX has four power levels, reaching up to 2500mW. It also features 40 channels, including Raceband, and fast frequency lock technology to eliminate startup interference with other pilots. Additionally, its CNC cooling casing and integrated cooling fan provide efficient heat dissipation.
Check out all of our video transmitters and our iFlight Collection!
The VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
Specifications:
- Input voltage: 7V～34V
- Interface: MMCX
- Power levels: PIT/25mW/400mW/1000mW/2500mW
- Channels: 40 (including Raceband)
- Mounting pattern: 25.5x25.5mm/Φ1.6
- Lightweight: 32g (excluding antenna)
- VTX telemetry: IRC Tramp
- Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight!
- RC Tramp VTX table values: 25mW/400mW/1000mW/2500mW
LED Indicator and Function Button
Power Button:
- Press and hole for 2s: Enter or exit PIT mode, solid green light indicates entering PIT mode
- Short press: Green light (output power): The number of LED flashing indicates the VTX output power. 1 flash=25mW, 2 flashes=400mW,3 flashes=1000mW, 4 flashes=2500mW. Short press to change output power.
Band and Channel Button
- Press and hole for 2s: Red(BAND): The number of LED flashing indicates the BAND A-R. Press and hold for 2s to switch Band.
- Short press: Blue(CH): The number of LED flashing indicate the channel 1 to 8. Short press to switch the Channel.
Ports
- VBAT: 2-8S，7-34V DC Positive Input
- GND: Negative
- 5v out: 5v Voltage Output
- IRC: IRC Tramp Signal Input
- GND: Negative
- Video in: Video Signal Input
- Camera in: Camera video Input
- Camera out:Camera video output
Package Includes:
- 1 x BLITZ Whoop 5.8G 2.5W VTX
Please read the instructions for proper wiring before use.
It is recommended that before switching on the power, make sure that the antenna has been installed, it can extend the life of the module.
It is recommended to ensure the correct voltage range and the correct positive and negative polarity before switching on the power to avoid burning the components.
Please keep enough space when you install the VTX to ensure air convection around the module for heat dissipation. Otherwise, the module will enable overheat protection and the power transmission will be reduced or even switched off
Laws and requirements regarding transmission of radio waves vary greatly across the world. In some countries, this product may not be legal. In the USA, the operator of this product is required by law to have a HAM amateur radio license, at the very least. It is the operator's responsibility to make sure that they are using this product in a legal manner, or not using it at all if not possible to do legally in their location. By adding this product to your cart, you are confirming that you have read this notice, and that Pyrodrone is in no way responsible for the actions of the operator while using this product.
