Skip to content
FREE SHIPPING ON ORDERS OVER $199
FREE US SHIPPING OVER $199

Happymodel Mobula8 2S Digital HD (Walksnail Avatar) 85mm Micro FPV Whoop Drone - ELRS 2.4

SKU P12-12035
Availability:
Out of stock
Sold out
Original price $294.99 - Original price $294.99
Original price
$294.99
$294.99 - $294.99
Current price $294.99



Here comes Mobula8 2S Digital HD FPV series with Walksnail Avatar System, New CrazyF405 ELRS flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight in HD Quality Video.

Here is our recommended 2S 550mAh Battery that fits perfectly in this drone!

    Check out our Micro Whoop Drones, our entire Happymodel Products and The Digital BNF/PNP/RTF Collection.

      Features:

      • Digital HD FPV experience
      • New CrazyF405 ELRS HD flight controller
      • Powerful and Smooth
      • UART ExpressLRS receiver
      • Built-in blackbox for Gyroflow and PID Tune

       

      Specifications:

      Motor

      • Mode: EX1103 KV11000
      • Configu-ration:9N12P
      • Stator Diamter:11mm
      • Stator Length:3mm
      • Shaft Diameter:Φ1.5mm
      • Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
      • Weight(g):3.8g
      • No.of Cells(Lipo):1-2S

       

      Propellers

      • Weight:0.88g
      • Material: PC
      • Pitch:2.3inch
      • Props Dia:52.17mm
      • Center Thickness:5mm
      • Center Hole Dia:1.5mm

       

      Flight Controller

      • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
      • GYRO Sensor: BMI270  (SPI connection)
      • Mount hole size: 25.5mm*25.5mm
      • Power supply: 1-2S battery input (DC 2.9V-8.7V)
      • Built-in 12A(each) Blheli_S 4in1 ESC
      • Built-in Serial ExpressLRS 2.4G
      • Built-in BMP280 Barometer
      • Built-in 8MBp blackbox
      • Built-in voltage meter sensor , voltage meter scale 110
      • Built-in current meter sensor , current meter scale 470

       

      Onboard 4in1 ESC

      • Power supply: 1-2S LiPo/LiPo HV
      • Current: 12A continuous peak 15A (3 seconds)
      • Support BLHeli_S Bluejay firmware
      • Factory firmware: Bluejay ESC V0.19
      • Firmware target: Z-H-30
      • Default protocol: DSHOT300
      • When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200

       

      Onboard UART ExpressLRS 2.4GHz Receiver

      • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
      • RF Frequency: 2.4GHz
      • Antenna: enameled copper wire 31mm length
      • Telemetry output Power: <12dBm
      • Default firmware version: ExpressLRS V3.0.1
      • Firmware target: HappyModel EP 2400 RX
      • Could update firmware via ExpressLRS configurator

      ** If bound to radio but having trouble seeing stick movement in Betaflight, then you may need to turn off the "Model Match" factory setting in the ELRS web GUI.

      Walksnail version

      • Camera Model       Avatar lite camera
      • Image Sensor     1/2.7”1nch
      • Resolution          1080P/60fps,720P/120fps,720P/60fps
      • Ratio      16/9  4/3
      • Lens          2.1mm
      • FOV         170°
      • Aperture            F2.0
      • Rolling shutter
      • Min.Illumination  0.001Lux
      • Weight       1.8g
      • Dimensions        14*14*16mm
      • VTX Model        Avatar mini 1s module
      • Communication Frequency    5.725-5.850GHz
      • Transmitter Power (EIRP)       FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
      • MIC:<25dBm
      • I/O Interface        JST1.0*6(Power in)JST0.8*4(USB)
      • Mounting Holes   25.5*25.5mm
      • Dimensions         30*30*6.5mm
      • Storage      8G
      • Recording  1080p/720p
      • Weight       5.1g
      • Operating Temperature  -20-40℃
      • Channels    8
      • Wide Power Input         3.1V-5V
      • Supported FC System  Betaflight
      • OSD  Canvas mode
      • Bitrate        25mbps 50mbps
      • Latency      Average delay 22ms
      • Antenna      IPEX 

       

       Package Includes:

      • 1x Mobula8 Frame
      • 1x CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4
      • 4x EX1103 KV11000 brushless motor
      • 1x Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)
      • 1x Walksnail avatar HD Mini 1S lite kit
      • 1x Canopy(DJI O3/Walksnail/HDZERO optional)
      • 1x Screw driver

      Disclaimer:

      We've recently received a high volume of inquiries regarding defects with Happymodel products. For any warranty issues, contact Happymodel directly for assistance. Please keep this in mind before purchasing this product. Happymodel support email: info@happymodel.cn


      Overall rating: 3.5 / 5 from 8 reviews.

      AI Generated Review Summary

      Summary topics

      Review topics: ["quad","whoop"].

      Review highlights

      Reviews

      "Why are we actually still using micro usb. im infuriated. this thing cane bricked, and i just cant use it because not only is this MICRO USB SLOT in the WORST spot possible, but also WHO STILL USES/HAS MICRO USB IN THE BIG 26. actually so disappointed in my >$300 drone THAT USES MICRO USB?!"

      — Isaiah (1/5)

      Unhappy fireball

      "This is my first FPV drone, was having a blast flying it for 12 packs. Of course I flew it too far away and lost VTX, hitting the ground hard. Swapped the frame with a spare I bought, powered it up to test, and was greeted with an electrical fire burning the ARM chip off of the AIO. Googling online I see that I am not the only one. Perfectly happy to acknowledge that I am very likely to have made a mistake, but the only electrical changes was unplugging the motors when moving between frames and plugging them back in. The connectors only fit one way. There is no metal in the frames to short. I have no idea what could have caused this but it almost caused a fire in the house, not really thrilled with that."

      — Dave C. (1/5)

      Big Whoop! Should ship with BTFL 4.4

      "Nice little quad, big whoop! Mine came missing a VTX antenna but it's the next day and Pyrodrone already has one in the mail to me, way to go! Luckily I had a spare for now. I was surprised that it comes with BTFL 4.3.2 which means no HD OSD canvas. As stated by another reviewer you will need to desolder one of the power wires to the Walksnail VTX to get the FC into DFU mode and flash BTFL 4.4.2 so that you can place OSD data wherever you want on the HD screen. I do not think this should be necessary but what are you gonna do? It's FPV ;) If you are not comfortable with small pads just cut the red or black VTX wire and then solder it back together. Happymodel has a dump file for the BTFL 4.4.2 Walksnail edition. The CLI command is the easiest way to get into DFU mode, the board uses solder pads. I also added a buzzer while I had the quad apart. Highly recommended if you fly outside!"

      — Eric (4/5)

      Mob8 madness

      "I can't believe the performance and flight times I get with this craft! I can whip aggressive freestyle 5-6 mins!"

      — Dustin A. (4/5)

      decent lil whoop, came DAMAGED

      "i was excited to add this quad to my collection but when I removed it from the box, I immediately noticed the corner of the camera lens was a slight chip and the edges of the lens were chewed, as if someone tightened it down with pliers. I contacted Pyrodrone and sent them an email with photos and they were very apologetic and asked if it was visible in the FPV feed. I got back to them and told them it wasnt. They said it must have come like that from HappyModel (I don't doubt it). I was very understanding, however, BOO on Pyrodrone for not even offering to send me a new lens for my brand new quad, maybe a set of props, or a sticker. They dismissed it with a "thanks for being understanding". I mean, I guess... That was a tad disappointing and a underwhelming buying experience. MEH! P.S. this quad on 2s and WS can rip very well, indoors and outdoors, and has HD walksnail video. 550mah 2s GNB's fit perfectly. also, "frames" are like $4.50 for backup"

      — Shawn B. (3/5)

      The “whoop” I’ve been waiting for

      "The Mobula8 has surprising power and agility. Walksnail provides a wonderful picture. I would have preferred a replaceable RX antenna for better performance, but that is my only complaint. Oh also the battery tray is very tight and any slightly puffed batteries will not fit. I wish there were interchangeable mounts. Upgrading to Betaflight 4.2.2 and applying the dump from the HappyModel website provided a much better flight performance and HD OSD. I’m very pleased with the purchase."

      — Shawn D. (5/5)

      Took a gamble on elrs version

      "With zero experience using ELRS proto i had it bound and flying in a couple hours. Refer to the documentation people its very helpful. Picture is phenomenal with the walksnail compared to my analog mob8 and what is this latency thing i keep hearing gripes about???"

      — Jordan N. (5/5)

      Not without flaws

      "Still struggling to get this in the air... First I could not flash BF 4.4.2 until desoldering the VTX. Now updated and it flies well, but I working with Caddx and Pyrodrone on a no range issue"

      — Royce W. (5/5)

      Q&A

      Compare products

      {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

      Select first item to compare

      Select second item to compare

      Select third item to compare

      Compare