Skystars F7HD Stack with 30x30 F722HD Pro4 Flight Controller & KM50A 50A ESC! The flight controller Includes 6 UARTS, a 10V 3A Regulator for Caddx Vista or DJI Air Unit, and 8MB Blackbox! The flight controller also has convenient solder pads placed at each corner for easy wiring of LED's. The KM50A ESC is stable for 6S voltages due to the use of lots of SMD capacitors and a large heatsink for heat dissipation and style. Flashed with the latest Blheli_32 firmware it also support telemetry functions (including voltage RPMS & current)!

Check out all our Stacks and the rest of our Skystars Products!

Skystars F7HD Pro4 Features:

Voltage Input: 3-6S (11.1V~22.2V)
Processor: STM32F722RGT6 216MHz
IMU: MPU6000
Uarts: 6
BEC: 5V @ 3A, 10V @ 3A
DJI Connector: DJI FPV Video Transmitter
Barometer: Yes
LED: 4 independent LED pads, support WS2812 programming
OSD: Betaflight OSD & DJI MSP OSD (UART6)
Firmware: SKYSTARS F7HD
USB connection: USB-C
Buzzer Pad: YES
Black Box: 16MB
CURR Pad: YES
RSSI Pad: YES
Mounting Holes: 30.5x30.5mm / M3
Weight: 6.8g

Skystars KM50A ESC Features:

Flashed with the latest Blheli_32 firmware
Highly Efficient ( Low Specific Heat Capacity ) heatsink for better cooling
Use of Aluminum alloy for heatsink
MOSFET's imported from the United States
Panasonic ZLH Ultra Low ESR Capacitor
PCB uses 3oz Copper which reduces heat and increase system efficiency
Large motor pads for easy soldering
Support telemetry functions ( Voltage ,RPMS & Current )
Inbuild overcurrent protection
Vibration isolation rubber to prevent cracks during crash
Supports custom ESC startup tone

Skystars KM50A ESC Specifications:

Input voltage : 3-6S LiPo / LiHV
Firmware : Blheli_32
Continuous Current : 50A
Peak Current : 60A (10S)
Overcurrent Protection : Yes
ESC Protocol : Dshot 600/1200
Mounting Hole Pattern : 30.5mm / M3
BEC : NO
Product size : 41x46x7.6mm
Weight : 17g

Package Includes:

1 x Skystars F7HD Pro 4 30.5x30.5mm Flight Controller
1 x SKYSTARS KM50A 32Bit 3-6S 30.5x30.5mm 4in1 ESC
4 x M3x20mm Screws
4 x M3x30mm Screws
4 x M3 Nylon Nuts
10 x Rubber Grommets
1 x XT60 Connector
1 x 8pin JST FC to ESC Cable
1 x 6pin JST FC to DJI Air Unit Cable
1 x 14AWG 10CM Battery Cable
1 x 35V 560uF Capacitor

Skystars F7HD Stack F722HD Pro 4 OSD & KM50A 50A ESC - 30 x 30mm