Holybro Kakute H7 Mini V1.3 W/Tekko32 F4 4in1 Mini 50A ESC STACK - 20x20mm

The Holybro Kakute H7 Mini is a Flight Controller full of features including onboard VTX ON/OFF Pit Switch with battery voltage, HD System/VTX & 4in1 ESC plugs, barometer, OSD, 6x UARTs, easy soldering layout and much more.

The Kakute H7 Mini builds upon the best features of its F7 predecessor and further improves on hardware components and layout. HD ready, it has an easy plug to power HD system like Caddx Vista while supporting analog system. It features an onboard “VTX ON/OFF Pit Switch” that allows you to completely power off the video transmitter using a switch on your RC transmitter. Great if you are working on your drone, waiting for the GPS to get a fix, getting ready for a race while preventing it from overheating or interfering with others flying.

It has 6x dedicated UART ports with built-in inversion for peripherals, 4in1 ESC plug, and x8 compatible with M5-M8 Signal Pads, allowing easy support for x8 Octocopter configuration. The integrated BetaFlight OSD makes it easy to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features and more. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers.

Version 1.3 has 1Gb Nand-Flash memory & BMI270 (instead of MPU6000)

Checkout all our 20x20mm Flight Controllers, 20x20 Stacks and the rest of our Holybro Collection!

Kakute H7 Mini Flight Controller Specifications::

• Input Voltage: 2-6S
• MCU - STM32H743 32-bit processor running at 480 MHz
• IMU - BMI270
• Barometer - BMP280
• OSD - AT7456E
• 6x UARTs (1,2,3,4,6,7)
  
• 9x PWM Outputs (8 Motor Output, 1 LED)
• 1 x JST-SH1.0_8pin port (4in1 ESCs)
• 1x JST-GH1.0_6pin port (For HD System like Caddx Vista & Air Unit)
• BEC: 5V 2A Cont.
• Mounting: 20x20mm/Φ3.6mm hole with ΦM3 and M2 Grommets
• Dimension: 31x30x6mm
• Weight: 5.5g 

Tekko32 F4 4-In-1 mini 50A ESC Features:

• New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
• PWM Frequency: 16k to 96k
• Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Tekko32 F4 4-In-1 mini 50A ESC Specifications:

• Continuous Current: 50A x4
• Burst Current: 60A x4
• BLHeli_32 firmware
• Amperage meter scale ratio has been adjusted to 120.
• PWM input, TLM supported
• Voltage output (VBAT)
• NO output BEC
• Supports oneshot / Multishot / Dshot PWM
• Supports damped light
• Supports 3-6S lipo input
• cap needed for 6s (1000uf 35v for 6s usage.)
• Mounting holes: 20x20mm (M2& M3 Rubber Gourmet Included)
• Size:32 x 40 mm

Package Includes:

• 1 x Kakute H7 Mini Flight Controller
• 1 x Tekko32 F4  4in1 Mini 50A ESC
• 1 x Electrolytic capacito: 1000uF 35v *1
• 1 x JST SH 8pin to 8pin 65mm cable *1
• 1 x JST SH 8pin to 8pin 25mm cable *1
• 1 x JST SH 6pin 150mm cable*1 
• 1 x JST SH 6pin to GH 8pin 150mm cable*1 
• 1 x JST SH 6pin to GH 8pin 80mm cable*1