Product Details
Expertly designed with a STM32 F722 MCU running at an impressive 216MHz and an ICM42688P gyroscope, this flight controller features an independent, low-noise power supply. With multiple ports including ESC, Digital VTX, Analog VTX, Receiver, and LED, setup is made quick and easy. Other notable features include a built-in analog video OSD, 16 Mbytes black box, and a high power synchronous rectifier BEC, providing stable 9V/3A & 5V/2A output with up to 8S input support.
Check out all our 30x30mm Flight controllers, Stacks and our Complete collection of Holybro Products.
Features:
- High-performance STM32 F722 MCU with speeds up to 216MHz.
- ICM42688P gyroscope, independent low-noise power supply.
- Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port.
- Built-in analog video OSD, 16 Mbytes black box,
- High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output.
Specifications:
- MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash
- IMU: ICM42688-P (SPI)
- Barometer: BMP280
- OSD: AT7456E
- 5x hardware UARTS (UART1,2,3,4,6)
- 7x PWM Outputs (6 Motor Output, 1 LED)
- Onboard 16 Mbytes for Blackbox logging
- Battery input voltage: 3S - 8S
- BEC: 9V/3A, 5V/2A, 3.3V/0.2A
-
Connector
- 2x JST-SH 8pin port for ESC
- 1x JST-SH 6pin port for HD VTX
- 2x JST-SH 4pin port for Receiver & Analog Camera
- 1x JST-SH 3pin port for LED
- USB Type -C
- Dimensions: 35x35mm
- Mounting Holes: Standard 30.5 x 30.5
- Weight: 8g
Firmware Targets:
- Betaflight Target: KAKUTEF7MINIV3
- INAV Target: KAKUTEF7MINIV3
Download the User Manual and Pinout Here
Tekko32 F4 4in1 60A ESC:
Features:
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16k to 96k
- Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Specifications:
- Continuous Current: 60A x4
- Burst Current: 70A x4
- Battery Supports: 4-6S
- PWM Frequency: 16k to 96k
- Supports DShot 150/300/600/1200/2400
- Supports MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120
- Dimensions: 48x37x6mm / Weight: 15.7g
- Mounting holes: M4 30.5x30.5mm (M3 grommets included)
Package Includes:
- 1x Kakute F722
- 1x Tekko32 F4 4in1 60A ESC
- 1x Electrolytic capacito: 1000uF 35v
- 1x 8pin to 8pin 1mm pitch 65mm cable
- 1x 8pin to 8pin 1mm pitch 25mm cable
- 1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
- 1x JST SH 6pin 100mm cable(for Caddx HD Systems)