Product Details
CLRACINGF7 V2ESC COMBO
The stack for RACERS
Main FC Features
- 1. MCU: STM32F722RET6 216MHz
- 2. DUAL 6-Axis ICM20602 Separated Interrupts
- 3. Build in Beta flight OSD
- 4. Up to 8S(36V) direct battery power
- 5. Build in Voltage monitoring resistor
- 6. Build in 5V/3A BEC and 3.3V/250mA for system
- 7. Led strip share 5V with 5V/3.0A BEC
- 8. 5V OR VBAT, camera and VTX POWER VIA Pit Switch
- 9. 6 Full UARTS: UART1, UART2, UART3, UART4, UART5, UART6
- 10. Build in Camera Control pin with necessary resistor and capacitor near camera connection
- 11. Buzzer pads for external buzzer
- 12. VBAT Polarity protection
- 13. Build in 32MB Blackbox flash chip
- 14. M4 Can be selected either led strip signal or M4 signal for RPM filtering
Main ESC Features
- LIPO: 2-6S LIPO
- Weight:13.5g
- Firmware: Blheli_32
- Size : 43.5mm x 46.5mm
- Mounting : 30.5mm x 30.5mm / ID 4mm
- Con.Current:45A, Peak 55A @10s
- Support: Dshot300-1200/MultiShot/OneShot/ProShot/PMW
- Connection: PNP with CLRACING F7 FC, with JST1.0 8 pin connector or soldering pads
- Current scale: 250
Includes:
- 1 x CLRACING F7 DUAL V2.2 ESC COMBO The stack for RACERS - 30x30mm
- 10 x M3*5mm nylon thread through spacers
- 5 x M3*25mm nylon screws
- 5 x M3 nylon nuts
- 5 x Yellow Grummits
- 2 x 14 AWG 80mm Silicone wires
- 1 x connection cable
- 1 x Amass XT60
- 1 x Rubycon 1000uf 35v ZLH capacitor