The MATEKSYS F405-TE Flight Controller features a 30.5 x 30.5mm mounting pattern and weighs 10g. It features a Barometer, Micro SD Slot, 6x UARTS, 11x PWM outputs, 9-36V DC IN (3-8S LiPo), 220A Current Sensor, BEC 12V 2A, 5V 1.5A and Dual analog camera signal inputs.

Check out all our Flight Controllers and the rest of our Matek Products!

Flight Controller Specifications

PWM Outputs: 11x PWM outputs (8x Dshot compatible with BF/ArduPilot)
Pads: 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
UARTS: 6x UARTs, 1x Softserial_Tx option(INAV/BF)
ADC: 4x ADC (VBAT, Current, RSSI, Airspeed)
Built-in inverter: UART2-RX for SBUS input
ESC: 4x individual ESC power/signal pads
Camera: Switchable Dual Camera Input
MCU: 168MHz STM32F405RGT6
Blackbox: MicroSD slot (SPI)
Dimensions: 36 x 46 mm
IMU: ICM42688-P (SPI)
Baro: SPL06-001 (I2C)
PINIO: 1x spare PINIO
OSD: AT7456E (SPI)
Weight: 10g

IMPORTANT NOTES

INAV, and DSHOT can not work on S3, S5, and S7 because of DMA clash, pls use ONESHOT or MULTISHOT and calibrate ESC PWM range.

Flight Controller Firmware:

BetaFlight: MATEKF405TE
INAV: MATEKF405TE_SD
ArduPilot: MatekF405-TE

PDB Specifications:

Battery Voltage divider: 1K:20K (INAV scale 2100, BF scale 210, ArduPilot BATT_VOLT_MULT 21.0)
Current Senor: 220A, 3.3V ADC (INAV/BF scale 150, ArduPilot 66.7 A/V)
PDB: 4x 35A (Max.4x 50A)
Input: 9~36V (3~8S LiPo)
LDO 3.3V: 200mA
BEC: 5V 1.5A
BEC: 12V 2A

Physical Specifications:

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 36 x 46 mm
Weight: 10g

Includes

1 x Matek F405-TE Flight Controller - 30x30mm
6 x silicon grommets M4 to M3
1 x Rubycon ZLH 35V/470uF (Low ESR)

Matek F405-TE Flight Controller - 30x30mm