Click here!
Excluding BFCM2025
Immersion RC Tramp/Ghost Hybrid V2 DUO 5.8GHz vTx/2.4GHz Rx
5.0 / 5.0
8 Reviews
There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp,...
View full detailsImmersion RC Tramp/Ghost Hybrid V2 UNO 5.8GHz vTx/2.4GHz Rx
4.9 / 5.0
14 Reviews
There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp,...
View full detailsImmersionRC Ghost Átto 2.4Ghz Receiver
5.0 / 5.0
0 Review
Size matters. The Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor. Most...
View full detailsImmersionRC Ghost Atto Duo – The Ultimate Racer’s Receiver
4.6 / 5.0
10 Reviews
Why Race with Anything Else? For racers on the bleeding edge, every little helps. Miss a single control packet at 160km/h (even at 222Hz) an...
View full detailsImmersionRC Ghost Lite Tx Module
5.0 / 5.0
4 Reviews
All You Want, and a Little More From the engineers who changed the Analog FPV world with rapidFIRE, comes the Ghost to set a new bar for R/C Contr...
View full detailsImmersionRC Ghost Proton Pack 20x20 - 3 Pack
5.0 / 5.0
4 Reviews
By far the cleanest, simplest way to integrate ImmersionRC's Ghost, and Tramp, into a quad. Ghost vTx control is wired by default directly to the T...
View full detailsImmersionRC Ghost Proton Pack 25x25 - 3 Pack
4.4 / 5.0
5 Reviews
By far the cleanest, simplest way to integrate ImmersionRC's Ghost, and Tramp, into a quad. Ghost vTx control is wired by default directly to the T...
View full detailsImmersionRC Ghost Proton Pack 30x30 - 3 Pack
5.0 / 5.0
1 Review
By far the cleanest, simplest way to integrate ImmersionRC's Ghost, and Tramp, into a quad. Ghost vTx control is wired by default directly to the T...
View full detailsImmersionRC Ghost qT 150mm Antenna for Atto 2.4GHz Micro Receiver
5.0 / 5.0
3 Reviews
A replacement antenna for the ImmersionRC Ghost Atto 2.4GHz Micro Receiver qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun...
View full detailsImmersionRC Ghost qT 200mm Antenna for Atto 2.4GHz Micro Receiver
5.0 / 5.0
7 Reviews
A replacement antenna for the ImmersionRC Ghost Atto 2.4GHz Micro Receiver qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun...
View full detailsImmersionRC Ghost qT 90mm Antenna for Atto 2.4GHz Micro Receiver
5.0 / 5.0
17 Reviews
A replacement antenna for the ImmersionRC Ghost Atto 2.4GHz Micro Receiver qTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun...
View full detailsImmersionRC Ghost TX 2.4ghz Transmitter Module
5.0 / 5.0
16 Reviews
From the engineers who changed the Analog FPV world with rapidFIRE, comes the Ghost to set a new bar for R/C Control technologies. Go faster, fur...
View full detailsImmersionRC Ghost Ultimate Hybrid 5.8GHz vTx/2.4GHz Rx
5.0 / 5.0
3 Reviews
In the FPV wold, we are conditioned… conditioned to cringe when leaving LOS, conditioned to fear concrete structures… until now. The Ultimate Hybri...
View full detailsImmersionRC LapRF 8-Way Personal Race Timing System
5.0 / 5.0
0 Review
Also known as LapRF V2. Best-in-class RF Race Timing System for races with 1 to 8 pilots. Nothing else on the market compares with this, period. T...
View full detailsImmersionRC Power Meter V2.1
5.0 / 5.0
2 Reviews
Every FPVers Toolbox Needs One… FPV is made possible thanks to two RF links, a control link, and a video link. Without an RF Power Meter a pilot ha...
View full detailsImmersionRC RapidFIRE w/ Analog PLUS Goggle Receiver Module (No Module Cover Included)
5.0 / 5.0
3 Reviews
The ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module is more than a diversity receiver. By using advanced algorithms it takes the best s...
View full detailsImmersionRC Replacement rapidFIRE Goggle Receiver Module Cover - Choose Type
5.0 / 5.0
5 Reviews
This a replacement Module Cover for the ImmersionRC rapidFIRE Video Receiver Module. Check out all our Goggle Modules and the rest of our Immersio...
View full detailsImmersionRC SpiroNET LZR Long Range Array Mounting Kit
The LZR Long Range Array Mounting Kit allows the mounting of two LZR 5.8GHz patch antennas for the ultimate long-range 5.8G flying. Using the custo...
View full detailsImmersionRC Tramp TNR Wand Personal Edition
ImmersionRC's unique 'TNR Wand'. An invaluable tool for programming TrampHV Video Transmitters via touch-free NFC. Just as at home programming a fe...
View full detailsImpulseRC APEX 5" CF Arm W/Broaching Nut
5.0 / 5.0
2 Reviews
Replacement 5" arms for ImpulseRC Apex Base Frame. Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!! Package I...
View full detailsImpulseRC Apex 5" Plastic Kit - Choose Color
4.9 / 5.0
19 Reviews
Replacement plastic kit for the ImpulseRC Apex 5" Drone Frame available in three colors: Black, Red, and Coyote Brown. Check out our ImpulseRC Apex...
View full detailsImpulseRC APEX 6" Arm Set - (4 PACK)
5.0 / 5.0
1 Review
Replacement 6" arms for ImpulseRC Apex Base Frame. Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!!
ImpulseRC APEX 6" CF 5.5mm Arm + Press Nut
5.0 / 5.0
8 Reviews
Replacement 6" arms for ImpulseRC Apex Base Frame. Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!! Packag...
View full detailsImpulseRC Apex 7" Carbon Fiber Arm & Press Nut
5.0 / 5.0
2 Reviews
Replacement 7" arm for the ApexLR 7" Frame and the ApexLR Light Weight 7" Frame. Check out our ImpulseRC Apex Spare Parts and the rest of our Impul...
View full detailsImpulseRC APEX Camera Side Plate CF 2MM (2 PACK)
5.0 / 5.0
0 Review
Replacement camera plates for ImpulseRC Apex Frame Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!!
ImpulseRC APEX EVO (O3) Base 5" Frame (Black Plastics)
5.0 / 5.0
2 Reviews
Here is the latest version of the famous Apex from ImpulseRC, the EVO 5"! Compatible with DJI O3, the EVO version brings improvements such as a red...
View full detailsImpulseRC APEX EVO Camera Kit
Replacement Camera Kit for ImpulseRC Apex EVO Base Frame. Compatible with Apex EVO standard, EVO DC and EVO LR edition frames only. Checkout all ou...
View full detailsImpulseRC Apex EVO Full Screw Pack
5.0 / 5.0
7 Reviews
Replacement hardware pack for the ImpulseRC Apex EVO 5" Drone Frame. Check out our ImpulseRC Apex EVO Spare Parts and the rest of our ImpulseRC Pro...
View full detailsImpulseRC APEX EVO Lower Main CF 2.5MM
5.0 / 5.0
1 Review
Replacement Lower Main Plate for ImpulseRC Apex EVO Base Frame. Compatible with standard geometry Apex EVO edition frames only, not compatible with...
View full detailsImpulseRC APEX EVO Upper Main CF 2MM
5.0 / 5.0
1 Review
Replacement Upper Main Plate for ImpulseRC Apex EVO Base Frame. Compatible with standard geometry Apex EVO edition frames only, not compatible with...
View full detailsImpulseRC Apex HD 5" TPU GoPro Session 30 Degree Mount W/ TBS ND Filter Slot - Black
3.0 / 5.0
1 Review
3D printed TPU 30 degree GoPro Session V5 mount that also accepts a TBS ND Filter for the extremely popular ImpulseRC Apex HD 5" frame. Check out a...
View full detailsImpulseRC APEX HD Upper Main Plate CF 2MM - Rev. 1
5.0 / 5.0
0 Review
Replacement upper main plate for ImpulseRC HD Apex Frame. Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!!
ImpulseRC APEX Lower Main CF 2.5MM (Legacy Apex Only)
5.0 / 5.0
1 Review
Replacement Lower main plate for ImpulseRC Apex Base Frame. Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!!
ImpulseRC APEX R-Lite 5" REAR HYBRID Replacement Arm
This is a replacement 5mm arm for the Apex R-Lite racing frameThis arm fits REAR HYBRID ONLYPackage includes:1 x replacement arm
ImpulseRC APEX R-Lite Stretch 5" Replacement Arm
4.0 / 5.0
2 Reviews
This is a replacement 5mm arm for the Apex R-Lite racing frameThis arm fits both front and rear of the Stretch framePackage includes:1 x replacemen...
View full detailsImpulseRC Apex Race Wire
5.0 / 5.0
6 Reviews
Race Wire that was designed to perfectly fit over the arms of the Apex frame!Protects your motor wires from prop strikes, and lets you change motor...
View full detailsImpulseRC APEX Top Plate CF 2MM - Rev. 1 (For Legacy Apex Only)
5.0 / 5.0
0 Review
Replacement top plate for ImpulseRC Apex Base Frame. Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!!
ImpulseRC APEX Upper Main CF 2MM (For Legacy Apex Only)
5.0 / 5.0
0 Review
Replacement upper main plate for ImpulseRC Apex Base Frame. Checkout all our ImpulseRC Apex Spare Parts and the rest of our ImpulseRC Products!!!
ImpulseRC ApexDC EVO Dead Cat 5" FPV Frame Kit (Black Plastics)
5.0 / 5.0
1 Review
Get ready to push your FPV drone flying to new heights with the ImpulseRC ApexDC EVO 5" FPV Frame Kit. This impressive drone frame features Dead...
View full detailsImpulseRC ApexDC 5" Frame Carbon Fiber Arm Key (1 Pc.)
5.0 / 5.0
1 Review
Replacement Carbon Fiber Arm Key for the ApexDC 5" Frame, ApexDC Light Weight 5" Frame Check out our ImpulseRC Apex Spare Parts and the rest of our...
View full detailsImpulseRC ApexDC 5" Frame Main Upper CF Plate 2MM - Rev. 1
5.0 / 5.0
3 Reviews
Replacement Main Upper Carbon Fiber 2mm Plate (Rev. 1) for the ApexDC 5" Frame and ApexDC Light Weight 5" Frame. Check out our ImpulseRC Apex Spare...
View full detailsImpulseRC ApexDC EVO (O3) Dead Cat Mr Steele Light Weight Edition 5" FPV Frame Kit
5.0 / 5.0
14 Reviews
Here is the latest version of the famous Apex from ImpulseRC, the EVO 5"! Compatible with DJI O3, the EVO version brings improvements such as a red...
View full detailsImpulseRC ApexDC/HD 5" Frame Top CF Plate 2MM - Rev. 1
5.0 / 5.0
0 Review
Replacement Top Carbon Fiber 2mm Plate (Rev. 1) for the ApexDC 5" Frame, ApexDC Light Weight 5" Frame, and ApexHD 5" Frame. Check out our ImpulseRC...
View full detailsImpulseRC ApexLR 7" Brace Kit
5.0 / 5.0
2 Reviews
Replacement 7" Brace Kit for the ApexLR 7" Frame and the ApexLR Light Weight 7" Frame. Check out our ImpulseRC Apex Spare Parts and the rest of our...
View full detailsImpulseRC ApexLR 7" Left Rear Arm & Press Nut
5.0 / 5.0
1 Review
Replacement 7" Left Rear arm for the ApexLR 7" Frame and the ApexLR Light Weight 7" Frame. Check out our ImpulseRC Apex Spare Parts and the rest of...
View full detailsImpulseRC ApexLR 7" Right Rear Arm & Press Nut
5.0 / 5.0
1 Review
Replacement 7" Right Rear arm for the ApexLR 7" Frame and the ApexLR Light Weight 7" Frame. Check out our ImpulseRC Apex Spare Parts and the rest o...
View full detailsImpulseRC ApexLR EVO (O3) 7" FPV Frame Kit
5.0 / 5.0
1 Review
The ApexLR 7" Frame for Longer-Range Exploration and Videography. Compatible with DJI O3, the EVO version brings improvements such as a redesigned ...
View full detailsImpulseRC BlackBird Echo Pro 5" FPV Frame Kit (O4 Mount Included)
5.0 / 5.0
2 Reviews
Now includes O4 camera mount (not antenna mount) with frame kit! N.B: The O4 antenna mount is not included by ImpulseRC and needs to be purchase...
View full details