Skip to content
FREE SHIPPING ON ORDERS OVER $199
FREE US SHIPPING OVER $199
Wishlist Pyro Points
iFlight Blitz Whoop F7 55A V1.1 AIO Flight Controller/ESC - 25.5x25.5

iFlight Blitz Whoop F7 55A V1.1 AIO Flight Controller/ESC - 25.5x25.5

SKU I2-11395
Availability:
in stock
$140.99 - $140.99
$140.99
$140.99 - $140.99
$140.99


This is our new iFlight BLITZ series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work. This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let's go! 

Check out all our Whoop Style AIO Boards, and the rest of our iFlight Products!


 Top Features:

  • Separated Flight Control board to minimize electrical gyro noise
  • Pass-through DJI O3 and Caddx Vista/Polar Connector
  • FC PCB can be disassembled from the ESC PCB; Repair allowed!
  • MCU: BGA-STM32F745, 216MHz
  • OSD: AT7456E
  • Blackbox: 16MB Onboard Flash
  • Gyro: BMI270
  • Barometer: DPS310


Flight Controller Specifications:

  • MCU: BGA-STM32F745
  • Gyro: BMI270
  • Blackbox: 16MB Onboard Flash
  • BEC output: 5V 2.5A
  • WS2812 LED Strip: Yes
  • Buzzer: Yes
  • Barometer: DPS310
  • Connector: Micro-USB
  • OSD: IFLIGHT OSD (AT745E）
  • FC Firmware：IFLIGHT_BLITZ_F7_AIO
  • Mounting pattern: 25.5*25.5mm φ3mm
  • Dimensions: 32.5*32.5mm
  • Weight: 10.5g
  • BEC: 5V 2A / 3A
  • Input voltage: 2-6S, support LIHV battery
  • Smartaudio / IRC Tramp VTX protocol supported

ESC Specifications:

  • ESC MCU: BB21
  • Driver: FD6288
  • Input voltage: 2-6S Support LIHV battery
  • Output current: 55A, peak value 65A (10 seconds)
  • ESC firmware: Q-H-40 - Bluejay, 0.16, 24kHz
  • Current sensor: ratio 200 (1/10mV/A)
  • BEC: NO
  • ESC Telemetry: NO
  • Bidirectional DShot: Yes(need to use Bluejay firmware)
  • Supports DShot DShot150/300/600/MultiShot/ OneShot etc.

    Package Includes:

    • 1 x iFlight Blitz F7 55A AIO Flight Controller/ESC - 25.5x25.5
    • 2 x Capacitor 470uF/35V
    • 1 x XT30U Male 18AWG cable 70mm
    • 1 x 1.0-7P cable 50mm-28mm
    • 1 x 1.0-7P cable 50mm
    • 4 x M2 silicon grommets
    • 8 x M2*12mm screws
    • 8 x M2 Transparent Nylon Nut
    • 10 x 0.8mm black Heat shrink tube 10mm

    Overall rating: 4.4615383 / 5 from 13 reviews.

    AI Generated Review Summary

    Summary topics

    Review topics: [].

    Review highlights

    Reviews

    Can't update firmware, other issues

    "Any attempt to upgrade the firmware results in USB connection lost. Any CLI commands will never save. Tried fixing with IRC driver fixer no luck. Tried every configurator, multiple cables, Mac, windows, Linux etc. In the end I was able to reverse the motors with BHeli and get the quad flying but there is no way to setup OSD since I can't set any UART to MSP in any configurator or CLI. I'll update this review if support can find a solution or if it turns out that I damaged it somehow. But at this time I've replaced it with a speedybee AIO and I have to be honest at half the price it is far superior. Not as many amps but it feels nicer quality, better packaging, better documentation and even a quality practice board to go with it."

    — Kurtis F. (2/5)

    DOA

    "Easy to build on, but I have a desync issue with mine so the rig isn’t really trusted."

    — gabriel T. (3/5)

    "I’ve had this AIO in a few of my builds. Dependable product from IFlight and Pyrodrone’s a reliable company! Happy flying"

    — Carlos (5/5)

    One of the best AIO

    "I put one of these in my Dji o3 2fiddy and it performs very well even on 6s hv lipos."

    — Matt w. (5/5)

    Bought this for INAV

    "You are going to have to compile a custom firmware if you want to use INAV on this board... its not hard. but it is a hoop."

    — Sean M. (5/5)

    GOOD

    "VERY GOOD"

    — YANIV P. (5/5)

    Nice!

    "Nice!"

    — Hongyuan L. (5/5)

    Good and reliable

    "Have this in a ummagawd 2fiddy. Great form factor and plenty for f power ."

    — Garrick B. (5/5)

    Solid AIO Whoop Style FC

    "Pad placement and size is easy to solder to. Board has a quality feel to it. 5v pad has enough amps for HDZ Whoop Lite VTX. ESC amp rating is plenty high for much larger builds. The only down side is that the gyro on mine will only allow a low PID loop refresh rate. Mine is only 3.something. No 4K or 8K refresh rates with this board."

    — Paul M. (5/5)

    Get one while you can

    "Or you will be waiting.."

    — Joseph D. (5/5)

    Q&A

    DIYFPV

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare