Walksnail Avatar HD Kit V2 Dual Antennas Version 32G with Camera V2+Gyroflow for Walksnail Avatar/Fatshark Dominator HD FPV System

This Walksnail Digital HD VTX / Micro Camera Kit V2 is designed for use with Walksnail Avatar/Fatshark Dominator HD FPV systems. It features H.265 encoding to provide 1080p FPV image quality with ultra-low latency and 2K pixels, 4:3 native sensor for improved image quality. The kit also supports Gyroflow for smoother, more stable video quality and provides 25mm x 25mm and 20mm x 20mm mounting holes for a wide range of compatibility. The durable PCB and shell designs, an optimized antenna placement, and an improved frequency binding button all provide excellent performance.

Don't forget to check out the rest of our Video Transmitters and Walksnail Products!!

Bullet Points for Walksnail Avatar HD Kit V2 (Dual Antennas)

• The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
• Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it's better fit for regular FPV race as well.

• The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.   
• Updated the design of PCB board and shell, improved the quality of VTX, more durable.
• Optimized the installation place of the antenna, so as to better protect the VTX.
• The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
• A spare pad is added to provide two power connection modes.

    

• New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability . Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.

• The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.

• Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate. 

• Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.

Features:

 Specifications:

Camera

• Model Avatar V2 camera
• Image Sensor 1/3.2-Inch 4Mp 4:3sensor
• Resolution 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
• Ratio 4:3 native /16:9
• Lens 2.1mm
• FOV 160°
• Aperture F2.0
• Shutter Rolling shutter
• Min.Illumination 0.001Lux
• Weight 7.2g
• Dimensions 19*19*22mm
• Coaxial Cable 140mm
• Gyroflow Only 32G VTX Supported

VTX

• Model Avatar V2 module(Dual Antenna)
• Communication Frequency 5.725-5.850GHz
• Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
• 1/O Interface JST1.0*4(Power in)JST0.8*6(USB)
• Mounting Holes 25.5*25.5mm; 20*20mm
• Dimensions 33.5*33.5*10.5mm
• Storage 32G
• Recording 1080p/720p
• Weight 15.4g
• Operating Temperature -20-40℃
• Channels 8
• Wide Power Input 6V-25.2V
• Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss
• OSD Canvas mode
• Latency Average delay 22ms
• Antenna 2(IPEX)

Antenna

• Avatar V2 antenna
• Polarization LHCP
• Bandwidth 5600MHz-6000MHz
• Gain 1.9dBi
• VSWR ≤1.5
• Input Impedance 50Ω
• Interface IPEX-1
• Size R15 X 45mm （without cable）
• Weight 2g

Package Includes:

• 1 x USB transfer extension cable
• 1 x 4 Pin silicone cable
• 8 x M2*4mm screws
• 4 x M2*5mm screws
• 4 x M2*6mm screws
• 4 x M2*14mm screws
• 4 x M2*5*0.5mm gasket