Skip to content
Wishlist Pyro Points

Brain3D Products

Hyperlite Toothpick Canopy

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

3D printed canopy designed around the Toothpick frame and Nano cams like Caddx EOS2, Runcam Nano2, Runcam Nano Racer. Package includes: 1 x CanopyW...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

TPU Immortal Holder Floss 3.0/30L

$3.50 - $3.50
$3.50
$3.50 - $3.50
$3.50
In stock

A simple solution from Brain 3D to secure your TBS Immortal antenna on the Floss 3.0 and Floss 3.0 Lite arms without adding too much weight.Will wo...

View full details
$3.50 - $3.50
$3.50
$3.50 - $3.50
$3.50

Micro Swift Mount for Floss And Similar Frames

$3.99 - $3.99
$3.99
$3.99
$3.99 - $3.99
$3.99
In stock

The Runcam micro swift is quickly becoming racers favorite FPV camera with this tiny high quality TPU printed mounts you will be able to use the m...

View full details
$3.99 - $3.99
$3.99
$3.99
$3.99 - $3.99
$3.99

TPU SMA and RX Antenna mount for 31mm spaced frames

$0.00 - $0.00
$0.00
$7.00
$7.00 - $7.00
$7.00
In stock

This sma mount will fit Floss 2 and Floss 2.1 frames.Compatible with any 31mm spaced standoffs.Weight: 2.5 Grams

$0.00 - $0.00
$0.00
$7.00
$7.00 - $7.00
$7.00

HyperLite EVO/Universal FPV Camera Mount ***CHOOSE COLOR***

$0.00 - $3.99
$0.00
$3.99
$3.99 - $3.99
$3.99
In stock

This light weight mount was designed by Kabab FPV for the HyperLite EVO frames.Can also be used with other frames.Specs:4.5mm mounting holes to sit...

View full details
$0.00 - $3.99
$0.00
$3.99
$3.99 - $3.99
$3.99

Hyperlite Freerange Stock GoPro Tab Base

$5.00 - $5.00
$5.00
$5.00 - $5.00
$5.00
In stock

This is a 3D printed accessory for the Hyperlite Freerange frame. Printed out of TPU and available in two colors. Check out our Hyperlite Freerange...

View full details
$5.00 - $5.00
$5.00
$5.00 - $5.00
$5.00

JTFPV FLOSS 3.0 TURTLE MODE FIN

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

The best Floss 3.0 fin ever!Designed by the one and only JTFPV Team Pyrodrone Pilot.No screws needed, this fin will "Stitch" through the top plate ...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Hyperlite Freerange Front Bumper w/ Immortal T Mount

$5.00 - $5.00
$5.00
$5.00 - $5.00
$5.00
In stock

This is a 3D printed accessory for the Hyperlite Freerange frame. Printed out of TPU and available in two colors. Check out our Hyperlite Freerange...

View full details
$5.00 - $5.00
$5.00
$5.00 - $5.00
$5.00

Brain3D M10Q-5883 GPS Module Standoff Mount w/ Immortal-T (3D Print Only) - (Black TPU, GPS not included) - Choose Size

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

This 3D print is made to hold your M10Q-5883 (SAM M10Q) GPS. This 3D printed mount holds your GPS module at a 25° angle off the back of your drone....

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Hyperlite Whoop Style Pod for UL3 and UL5

$8.49 - $8.49
$8.49
$8.49 - $8.49
$8.49
In stock

High quality 3D printed TPU pod specially designed for the Hyperlite UL series of ultralite frames but will also fit any frame with Whoop style mou...

View full details
$8.49 - $8.49
$8.49
$8.49 - $8.49
$8.49

Brain3D M10-5883 GPS Module Standoff Mount w/ Immortal-T (3D Print Only, GPS Not Included) - (Black TPU, GPS) - Choose Size

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

This 3D print is made to hold your M10-5883 GPS. This 3D printed mount holds your GPS module at a 25° angle off the back of your drone. Please choo...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Brain3D M8Q-5883 GPS Module And Immortal-T Standoff Mount (Black TPU, GPS not included) - Choose Size

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

This 3D print is made to hold your M8Q-5883 GPS and Immortal-T antenna. This 3D printed mount holds your GPS module at a 25° angle off the back of ...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Hyperlite Freerange Stock GoPro Hero 8 Mounting Case - Built in ND Filter Slot

$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00
In stock

Please make sure to pick up the hinged GoPro Tab Base to mount this case! This is a 3D printed GoPro Hero 8 Mounting Case for the Hyperlite Freeran...

View full details
$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00

Hyperlite Freerange Front Bumper

$3.00 - $3.00
$3.00
$3.00 - $3.00
$3.00
In stock

This is a 3D printed accessory for the Hyperlite Freerange frame. Printed out of TPU and available in two colors. Check out our Hyperlite Freerange...

View full details
$3.00 - $3.00
$3.00
$3.00 - $3.00
$3.00

Hyperlite Freerange Stock Mounting Hero 9 Case - Built in ND Filter Slot

$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00
In stock

Please make sure to pick up the hinged GoPro Tab Base to mount this case! This is a 3D printed GoPro Hero 9 Case for the Hyperlite Freerange frame....

View full details
$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00

Hyperlite GLIDE Session Mount (Choose Angle)

$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00
In stock

Gopro Session mount for the Hyperlite Glide freestyle framesAvailable in 30 and 40 degrees.Weight: 25Gr.

$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00

Brain3D TBS M8.2 GPS Module And Immortal-T Standoff Mount (Black TPU, GPS not included) - Choose Size

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

This 3D print is made to hold your TBS M8.2 GPS and Immortal-T antenna. This 3D printed mount holds your GPS module at a 25° angle off the back of ...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Hyperlite Freerange SMA-T Mount

$7.00 - $7.00
$7.00
$7.00 - $7.00
$7.00
In stock

This is a 3D printed accessory for the Hyperlite Freerange frame. Printed out of TPU and available in two colors. Check out our Hyperlite Freerange...

View full details
$7.00 - $7.00
$7.00
$7.00 - $7.00
$7.00

Brain3D HGLRC M80 Pro GPS Module And Immortal-T Standoff Mount (Black TPU, GPS not included) - Choose Size

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

This 3D print is made to hold your HGLRC M80 Pro GPS and Immortal-T antenna. This 3D printed mount holds your GPS module at a 25° angle off the bac...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Hyperlite Freerange Stock GoPro Hero 5/6/7 Mounting Case

$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00
In stock

Please make sure to pick up the hinged GoPro Tab Base to mount this case! This is a 3D printed accessory for the Hyperlite Freerange frame. Printed...

View full details
$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00

Hyperlite Flowride Floss & Fairy Session Mounts

$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00
In stock

These Session mounts are made for the Hyperlite Fairy and Flowride Floss frames. They have 27mm wide front mounting bolts and a single center bolt ...

View full details
$15.00 - $15.00
$15.00
$15.00 - $15.00
$15.00

Brain3D Solder Desk V1.0 - Choose Color (Desk ONLY, NO Helping Hands)

$33.00 - $33.00
$33.00
$33.00 - $33.00
$33.00
In stock

The Brain3D Solder Desk is a must have if you want to make soldering easier!  Please note the 2 x Magnetic 3rd Hands are not included.You can purch...

View full details
$33.00 - $33.00
$33.00
$33.00 - $33.00
$33.00

Brain3D SAM-M8Q GPS Module And Immortal-T Standoff Mount (Black TPU, GPS not included) - Choose Size

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

This 3D print is made to hold your SAM-M8Q GPS And Immortal-T antenna. This 3D printed mount holds your GPS module at a 25° angle off the back of y...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Gopro Mounting Adjustable Base - Black (Choose Frame)

$5.99 - $5.99
$5.99
$5.99 - $5.99
$5.99
In stock

These 3D prints are made to bolt to a specific frame that is listed in the drop down menu. If you do not see the frame listed then we do not have i...

View full details
$5.99 - $5.99
$5.99
$5.99 - $5.99
$5.99

Hyperlite Freerange SMA/RX Mount

$7.00 - $7.00
$7.00
$7.00 - $7.00
$7.00
In stock

This is a 3D printed accessory for the Hyperlite Freerange frame. Printed out of TPU and available in two colors. Check out our Hyperlite Freerange...

View full details
$7.00 - $7.00
$7.00
$7.00 - $7.00
$7.00

PyroDrone 20 oz. Insulated Water Bottle (Choose Color)

$29.99 - $29.99
$29.99
$29.99 - $29.99
$29.99
In stock

Stay Hydrated with the PyroDrone 20 oz. Insulated Water Bottle! Elevate your hydration game with our premium 20 oz. insulated water bottle. Designe...

View full details
$29.99 - $29.99
$29.99
$29.99 - $29.99
$29.99

Brain3D Session mount for Floss 2 and 2.1

$0.00 - $0.00
$0.00
$15.00
$15.00 - $15.00
$15.00
In stock

Floss 2 and 2.1 session mount available in 30 and 40 degrees.Secures on the frame with front 2 bolts and a ziptie on the back.Will ONLY work with t...

View full details
$0.00 - $0.00
$0.00
$15.00
$15.00 - $15.00
$15.00

Brain3D M10-DQ GPS Module Standoff Mount w/ Immortal-T (3D Print Only, GPS Not Included) - Black TPU - Choose Size

$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99
In stock

This 3D print is made to hold your M10-DQ GPS. This 3D printed mount holds your GPS module at a 25° angle off the back of your drone. Please choose...

View full details
$6.99 - $6.99
$6.99
$6.99 - $6.99
$6.99

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare