IFlight Nazgul XL10 V6 6S Analog 10 inch Long Range Drone 2.5W VTX - TBS Crossfire Nano Rx

It's proud to announce the release of the XL10 V6 analog BNF, XL10 V6 6S Analog is a 10" BNF quadcopter that comes with the BLITZ Whoop 1.6W VTX Video Transmission System, and HQ  10" 3-Blade  propellers. The XL10 V6 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! Loaded with lots of power; it comes with the XING2 3314motors, BLITZ F7 Flight Controller, and the BLITZ E55 4-IN-1 ESC, which make this quad a must-have!

The XL10 V6 BNF fly is balanced because of the true X configuration and wide stance. These main changings make flight stable in the air.

Battery Recommendation (NOT INCLUDED): 6S 5600mAh to 8000mAh Li-on Battery

You can find all the related parts in The IFlight XL10 V6 10 inch Long Range Drone Frame Collection

Check out all our Analog BNF/PNP/RTFs and the rest of our IFlight Products!

 Highlights:

• Full 3K Carbon Fiber airframe
• Popular True-X configuration
• Big size XING2 3314 with extreme lift and flight performance
• GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)

Specifications:

• Product Name: XL10 V6 Analog 10 inch
• FC: BLITZ F722 Flight Controller
• ESC: BLITZ E55 4-IN-1 2-6S 55A ESC
• Video Transmission: BLITZ Whoop 1.6W VTX/ BLITZ whoop 2.5W VTX
• Frame: 420mm wheelbase
• Motor: XING2 3314 900KV motors
• Prop: HQ 10X4.5X3 propellers
• Weight: 860g (Without Battery)
• Dimensions (L×W×H)：297x297x35mm
• Max Speed: 140km/h
• Maximum Takeoff Altitude: 6000 m
• Max Hover Time: Approx. 40 min (with 21700 6S2P 8000mAh no load)
• Operating Temperature Range: -10° to 40° C (14° to 104° F)
• Antennas: Single Antenna
• GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Video Transmission:

• Product Name: BLITZ Whoop 5.8G 1.6W VTX
• Output Power: PIT/25mW/400mW/800mW/1600mW
• Input Volts: 12V
• Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA
• Transmission fre: 40CH(A-B-E-F-R)
• Antenna Interface: IPEX
• Mounting Hole: 25*25/φ1.6mm
• Weight: 16.5 g (Without antenna and cable)
• Dimensions: L37mm*W31.5mm*H10mm
• 
  
• Product Name: BLITZ Whoop 5.8GHz 2.5W VTX
• Output Power: PIT/25mW/400mW/1000mW/2500mW
• Input Volts: 7-34V
• Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA
• Transmission fre: 40CH(A-B-E-F-R)
• Antenna Interface: MMCX
• Mounting Hole: 25*25/φ1.6mm
• Weight: 32g
• Dimensions: 50*30*16mm

Package Includes:

• 1 x XL10 V6 6S Analog BNF
• 1 x Battery pad
• 1 x Antenna
• 2 x Propellers(Pair)
• 2 x Battery strap

Important
All iFlight BNFs are tested before shipment to guarantee the highest quality.
If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

Note
1. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:
(1)Any military combat purpose or military combat related use;
(2)Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

2. If party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.