Skip to content

ViFly ToothStor - 4 Port 2S Balance Charger with Storage Mode

SKU P2-12894
Availability:
in stock, ready to be shipped
Original price $32.99 - Original price $32.99
Original price
$32.99
$32.99 - $32.99
Current price $32.99

All products with batteries must be shipped by a ground shipping method.


VIFLY ToothStor is a combination of 2S charger and discharger. It has 4 target voltages per cell (3.8V/3.85V/4.2V/4.35V), set your target voltage like 3.8V/cell (LiPo Storage Voltage), it will start the charging or discharging process automatically when the battery is lower or higher than 3.8V.

Check out our other Chargers and all of our ViFly Products!

Features:

    • 【4 Port 2S Balance Charger with Storage Mode】You can balance charge four 2S batteries at the same time. And they are 4 independent charging channels, not necessary to ensure the batteries are all the same voltage or the same size. In addition to charging the battery to full voltage, you can charge or discharge it to storage voltage for long time storage.
    • 【Colorful LCD Screen, Intuitive Interface】VIFLY ToothStor installs high quality LCD screen, the charging status is displayed clearly and the intuitive interface makes the operation very simple.
    • 【Support XH2.54 and BT3.0 Batteries】VIFLY ToothStor pre-soldered four XH2.54 and BT3.0 connectors, so it can work with any general XT30 2S battery with 3Pin XH2.54 Balance Plug or BetaFPV BT3.0 battery, but don’t put the two batteries in the same port.
    • 【Strong Heat Dissipation CapabilityThe fan and big heat sink would effectively dissipate the heat to prevent the unit from overheating. This greatly improves the efficiency and speed of the discharging.
    • 【Multiple Power Input】It supports Type-C, XT60 and DC power input. Type-C supports PD3.0 protocol that requests the input power must be higher than 65W.
    • 【Memory Function】VIFLY ToothStor had the memory feature of remembering last time settings, no need to set the charge current every time you turn it on.
    • 【Buzzer Indication】VIFLY ToothStor added the buzzer to beep when one charging circle finished, if you don’t like beeping, you can turn the buzzer off manually.

    Specifications:

    • Dimensions 109*56*30mm
    • Weight 142g
    • Input connector XT60, DC(5.5*2.1mm), USB-C(PD3.0)
    • Input voltage range 10V-26V
    • Minimum input power 65W
    • Max charging current 1.5A/port
    • Support battery connector XH2.54 3Pin & BT3.0
    • Battery type LiHV / LiPo
    • Storage voltage 3.80V/Cell & 3.85V/Cell
    • Max discharge current 0.2A/port
    • Balance Current 0.2A

    Package Includes:

    • 1 x ViFly ToothStor - 4 Port 2S Balance Charger with Storage Mode

      Battery Disclaimer:

      Li-Po and Li-Ion batteries must be cared for properly when stored, and NEVER charged, balanced, or discharged unattended.
      ALWAYS be in the same room within line of sight of charging or discharging batteries.
      NEVER charge or discharge batteries on a flammable surface.
      Failure to follow these instructions may result in fire, personal injury, and/or property damage.
      By purchasing this battery, you agree that Pyrodrone and the battery manufacturer are in no way responsible for consumer battery charging and care, or any of the risks associated with Li-Pos or Li-Ions.


      >

      Compare products

      {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

      Select first item to compare

      Select second item to compare

      Select third item to compare

      Compare