Skip to content
PHONE SUPPORT IS UNAVAILABLE DUE TO POWER OUTAGES - EMAIL SUPPORT@PYRODRONE.COM
FREE US SHIPPING OVER $100
Wishlist Pyro Points
TUNERC Noodle AT32F435 3S-6S Flight Controller - 30x30mm

TUNERC Noodle AT32F435 3S-6S Flight Controller - 30x30mm

SKU N10-13858
Availability:
in stock
$28.65 - $28.65
$28.65
$28.65 - $28.65
$28.65


The Noodle AT32F435 FC is a flight controller that is suitable for various different builds from racing, freestyle quads, to cinelifters. No matter whether you fly analog or digital, prefer solder pads over connectors, or identify as a racer, freestyle pilot, or photographer, the Noodle AT32F435 FC is designed to meet all your needs.

The Noodle AT32F435 FC features solder pads on one side and connectors on the other side. It also comes with dual BEC 5V 1.5A, 9V 2A, suitable for both analog and digital builds. 4x UARTs, I2C port, onboard barometer, 8M blackbox, all of these features make the Noodle a go-to option for your builds.

Download the full wiring diagram & specifications guide here.

Dedicated LDO for Gyro ICM42688P:

Nothing is more frustrating than struggling to tune a noisy flight controller. A dedicated LDO for gyro is designed to provide a stable and clean power supply for the ICM42688P, making Noodle AT32F45 FC a robust brian for your quads.


Why AT32F435CGU7 MCU?

The AT32F435CGU7 chip is  high-performance. Its processing speed is 288MHz and it has 1MB flash memory, which means the AT32F435 performance is comparable to its counterparts.

And since Betaflight 4.5, the support for AT32 FC  is introduced, you don’t need to mess around drivers or anything else. You can directly configure the Noodle AT32F435 FC in Betaflight configurator.

Hardware Specification

  • MCU: AT32F435CGU7
  • OSD: AT7456E
  • Onboard Gyro: ICM-42688-P
  • Onboard Barometer: DPS310
  • Flash: W25Q64 (8M)
  • ESC Signal: M1-M4
  • 4 x UARTs
  • 1 x I2C

Electronics Specification

  • Input Voltage: 10.5-28V (3s-6s)
  • BEC Output: 5V1.5A  9V2A

Firmware

  • Betaflight Target: TUNERCF435

Dimensions

  • Widest Dimension: 37mm x 37mm
  • Mounting Holes Pattern: 30.5mm x 30.5mm (M3 grommets to make M3 mount)
  • Weight: 7.3g

Connectors

  • Except LED connector and buzzer connector, all the other connectors onboard apply to Betaflight connector standard

 

Includes

  • 1x TUNERC Noodle AT32F435 3S-6S Flight Controller - 30x30mm
>

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare