APD F-Series 80F3[X]V2 8s 80a 34v Indivudual ESC

The improved F_Series 80F3[X] ESCs. Building upon our trusted ARM 32-bit architecture, the V2 release features introduce a number of highly requested features into the product range, including configuration options, Bi-Directional DShot, and UART overvoltage protection. The 80F3[X]v2 ESCs are drop-in replaceable to 80F3[X] units. As before, existing features include PWM-frequency dithering and Active Phase-Current Demagnetisation, allowing for smooth control with virtually all powertrain combinations with peak power outputs of up to 4.7 kW.

NDAA/DFARS-compliant options available upon request.

New Feature Set (V2)

• Configuration of drive parameters, signal types and fault handling
• Bi-Directional DShot for RPM Filtering support
• On board bootloader
• Passthrough firmware updating and configuration
• Additional Telemetry types: PWM Telemetry and RPM Output
• High-speed telemetry rates when operating DShot and ProShot
• Reversible operation support (full forwards to full reverse)
• Dynamic signal quality checks across supported input protocols
• Hardware protection for UART programming pins

 Check out all our ESC's and APD Products Offerings!

Feature Set:

• Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability
  
• Proprietary firmware designed in Australia
  
• Plug and play firmware
  
• Up to 8S (34 V) capable
  
• Up to 80 A continuous* output current
  
• 140 A Burst current
  
• True 10-bit resolution
  
• Virtually no setup time, with simple motor reverse solder tab
  
• Auto-detect ProShot or DShot
  
• ProShot1000 capable (1Mbs/s)
  
• DShot150 to DShot600 capable (0.15-0.6Mbs/s)
  
• Up to 750,000 eRPM (protocol dependant)
  
• Motor agnostic
  
• Auto PWM output frequency
  
• Auto timing advance
  
• Telemetry output
  
• Automatic current limiting and over-temperature protection
  
• LED indication
  
• Digital commands over ProShot (including anti-turtle mode)
  
• Digital commands over DShot
  
• Bare-PCB design to allow maximum integration within the end setup
  
• 8-Layer PCB to ensure minimal track resistance

* Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 60 seconds with 33 m/s airflow.

Documentation and Datasheets can be found at: docs.powerdrives.net

Additional Information:

• Weight: 0.02kg
  
• Dimensions: 44x22x12mm
  
• Documentation: docs.powerdrives.net
  
• CAD Model: 80F3 CAD Model
  

Package Includes:

• 1 x APD F-Series 80F3[X]v2 8s 80a 34v Indivudual ESC