{"product_id":"matek-m10q-5883-gps-module-gps-compass","title":"Matek M10Q 5883 GPS module (GPS+Compass)","description":"\u003cdiv class=\"av-special-heading av-special-heading-h2  blockquote modern-quote modern-centered  avia-builder-el-0  el_before_av_textblock  avia-builder-el-first\"\u003e\n\u003cdiv class=\"av-subheading av-subheading_below\"\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eMATEKSYS M10Q-5883 GNSS \u0026amp; Compass\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eis a powerful multi-constellation GNSS module powered by u-blox SAM-M10Q-00B. Thie MQ10-5883 supports concurrent reception of GPS, GLONASS, Galileo, and BeiDou, providing exceptional sensitivity and maximum position availability. The high-gain 15 x 15 mm2 patch antenna offers the best balance between performance and small size, while the omnidirectional radiation pattern increases installation flexibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out our all our \u003ca href=\"https:\/\/pyrodrone.com\/collections\/fc-accessories\" title=\"Flight Controller Accessories Sold At Pyrodrone\"\u003eFlight Controller Accessories\u003c\/a\u003e\u003cspan\u003e and the rest of our \u003c\/span\u003e\u003ca href=\"https:\/\/pyrodrone.com\/collections\/matek-products\" title=\"Matek Products sold at Pyrodrone\"\u003eMatek products!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/M10Q-5883_2_da733d8b-3310-488c-934b-7153fe5273c8.jpg?v=1782928564\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"av_textblock_section\"\u003e\n\u003cdiv class=\"avia_textblock\"\u003e\n\u003ch3\u003eFeatures\u003cstrong\u003e:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.\u003c\/li\u003e\n\u003cli\u003eThe high-gain 15 x 15 mm2 patch antenna provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.\u003c\/li\u003e\n\u003cli\u003eThe SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals.\u003c\/li\u003e\n\u003cli\u003eM10Q-5883 uses a multi-constellation GNSS module powered by u-blox SAM-M10Q-00B.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e Specifications:\u003c\/h3\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGNSS PPS LED, Green. (Solid ON after powering on,  blinking(1Hz) when GNSS get 3D fix)\u003c\/li\u003e\n\u003cli\u003eProtocol: UBX(u-blox)  5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz \u003c\/li\u003e\n\u003cli\u003eGNSS u-blox SAM-M10Q-00B (GPS, GLONASS, Galileo and BeiDou)\u003c\/li\u003e\n\u003cli\u003eProtocol: UBX(u-blox)  5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz\u003c\/li\u003e\n\u003cli\u003eJST-GH-6P connector (SM06B-GHS-TB). 1.27mm pitch\u003c\/li\u003e\n\u003cli\u003eI2C(DA, CL) interface for Compass QMC5883L\u003c\/li\u003e\n\u003cli\u003eUART(TX, RX) interface for GNSS SAM-M10Q-00B\u003c\/li\u003e\n\u003cli\u003eInput voltage range: 4~9V (5V pad\/pin)\u003c\/li\u003e\n\u003cli\u003eOperating Temperatures: -20~80 °C\u003c\/li\u003e\n\u003cli\u003eMagnetic Compass QMC5883L\u003c\/li\u003e\n\u003cli\u003eUART baudrate: 9600 default\u003c\/li\u003e\n\u003cli\u003ePatch antenna 15*15*4mm\u003c\/li\u003e\n\u003cli\u003ePower consumption: 13mA\u003c\/li\u003e\n\u003cli\u003e20mm*20mm*12.4mm\u003c\/li\u003e\n\u003cli\u003e8g\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWIRING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM10Q-5883  5V to Flight controller 4~9V\u003c\/li\u003e\n\u003cli\u003eM10Q-5883  RX to Flight controller UART_TX\u003c\/li\u003e\n\u003cli\u003eM10Q-5883  TX to Flight controller UART_RX\u003c\/li\u003e\n\u003cli\u003eM10Q-5883  CL to Flight controller I2C_SCL\u003c\/li\u003e\n\u003cli\u003eM10Q-5883  DA to Flight controller I2C_SDA\u003c\/li\u003e\n\u003cli\u003eM10Q-5883  G  to Flight controller GND\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTips and Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompass Alignment(flat mounting): Tilting the magnetometer is strongly discouraged !\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eINAV\/BetaFLight: compass Arrow forward, set CW 270° Flip when flight controller arrow is facing forward.\u003c\/li\u003e\n\u003cli\u003eINAV\/BetaFLight: compass Arrow backward, set CW 90° Flip when flight controller arrow is facing forward.\u003c\/li\u003e\n\u003cli\u003eArdupilot\/Mission Planner: Rotation None.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMake sure to have compass\/magnetometer 10cm away from power lines\/ESC\/motors\/iron based material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e——————–\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eINAV 5.0.0, Betaflight 4.3.0,  ArduPilot 4.3 or newer is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eUBlox NEO-M9N, MAX-M10S, SAM-M10Q series all don’t have dataflash built in.  once GNSS is powered off and the supercapacitor run out. the settings will back to default.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eUBX protocol is bidirectional.  Flight controller firmware can change settings on GPS via UBX protocol. You don’t need to set GNSS module parameters in u-center.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe default configuration on M10 GNSS with ublox FW 5.1 is concurrent reception of GPS, Galileo, GLONASS, and BeiDou B1C with QZSS and SBAS enabled.\u003c\/li\u003e\n\u003cli\u003eStart with u-blox GNSS FW3.01, timepulse is aligned with UTC time and that time is set valid only after leap second is downloaded. That could take up to 12.5 min. Probably PPS LED will not blink immediately after GPS has 3D fixed.\u003c\/li\u003e\n\u003cli\u003eThe M10Q-5883 provides the ability to reset the receiver. Bridging “RST” pad to Ground for at least 100 ms will trigger a cold start. RESET will delete all information and trigger a cold start. It should only be used as a recovery option. If you are sure wiring and setup are all right. but flight controller can’t detect the GNSS module(grey GPS icon), try doing reset.\u003c\/li\u003e\n\u003cli\u003eThe scratches on ceramic antenna are the result of tuning the antenna.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTroubleshoot GPS related issues:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.mateksys.com\/?p=5712#tab-id-6\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/www.mateksys.com\/?p=5712#tab-id-6\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eu-center Windows\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x M10Q-5883\u003c\/li\u003e\n\u003cli\u003e1 x JST-GH-6P to JST-GH-6P 20cm silicon wire\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Matek","offers":[{"title":"Default Title","offer_id":44323383246891,"sku":"S2-14580","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/mateksys-m10q-5883-gnss-_-compass_1.jpg?v=1782928458","url":"https:\/\/pyrodrone.com\/products\/matek-m10q-5883-gps-module-gps-compass","provider":"Pyrodrone","version":"1.0","type":"link"}