Matek F722 Mini SE 20x20 Flight Controller

Regular price $59.99 Sale

Availability: Available Unavailable

Product SKU: 2A-8514

Product Details

The new updated SE version of Matek F722 Mini is now equipped with BMP280 Barometer

Check out all our 20x20 Flight Controllers and the rest of our Matek Products


  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • OSD: AT7456E (SPI)
  • Baro: Infineon DPS310 (I2C)
  • Blackbox: 32M-byte Flash memory (SPI)
  • 5x Uarts (1,2,3,4,6) with build-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/oneshot outputs
  • 1x I2C
  • 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Convertible 20mm to 30.5mm mounting
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • DJI OSD: Yes (any spare Uart Tx & Rx)
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed


  • Input: 6~36V (2~8S LiPo)
  • BEC: 5V 2A
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in, supports external current sensor of PDB/4in1


  • INAV target: MATEKF722mini
  • BetaFlight unified target: MATEKF722mini(MTKS)
  • BetaFlight legacy target: MATEKF722SE


  • Mounting
    • 20 x 20mm/Φ3mm with Silicon Grommets
    • 20 x 20mm/Φ2mm with Silicon & Brass Grommets
    • 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
  • Dimensions:  28 x 28 mm


  • 1x Matek F722-Mini SE 30x30 Flight Controller



Pad/Hole Pin name Function BetaFlight INav INav INav
Multirotor Multirotor Tricopter Plane
S1 PB4 TIM3_CH1 motor-1 motor-1 motor-1 servo
S2 PB5 TIM3_CH2 motor-2 motor-2 motor-2 servo
S3 PB0 TIM3_CH3 motor-3 motor-3 motor-3 servo
S4 PB1 TIM3_CH4 motor-4 motor-4 servo
S5 PA15 TIM2_CH1 motor-5 motor-5 servo
S6 PB3 TIM2_CH2 motor-6 motor-6 servo
S7 PB6 TIM4_CH1 motor-7 servo servo motor-1
S8 PB7 TIM4_CH2 motor-8 servo motor-2
LED PA8 TIM1_CH1 2812LED 2812LED 2812LED 2812LED
RX2 PA3 TIM9_CH2 RX2/ppm RX2/ppm RX2/ppm RX2/ppm
TX2 PA2 TIM9_CH1 TX2/pwm1 TX2 TX2 TX2
RX4 PA1 TIM5_CH2 RX4/pwm2
TX4 PA0 TIM5_CH1 TX4/pwm3
PA4 PA4 ADC AirSpeed


  • INAV2.5.1 and Betaflight 2.4.x downloaded from configurator don’t support new barometer DPS310.
  • DPS310 will be supported officially by INAV2.6/ BetaFlight 4.3 and new configurator.
  • For now, pls download customized INAV2.5.1 and BetaFlight 2.4.0 from here.


If Baro can’t be detected. In INAV CLI mode, type command

  • set baro_hardware = DPS310
  • save


If Baro can’t be detected. In BF CLI mode, type command

  • set baro_bustype = I2C
  • set baro_i2c_device = 1
  • set baro_i2c_address = 118
  • set baro_hardware = DPS310
  • save

Your cart