Lethal Conception - Bando Killer by Tomz
The Bando Killer is a 5-inch frame, dedicated to freestyle in abandoned areas: the Bando!
The Bando Killer was born from the collaboration of 2 big names of the French FPV scene namely the pilot Thomas Panaiva (aka Tomz FPV) and the manufacturer Lethal Conception.
The Bando Killer Lethal Conception has been developed to offer the best performance at the best price.
This agile, precise and robust frame is perfect for facing the hardest Freestyle spots!
Cut in perfect X, the Bando Killer is ready to fight because it has all the qualities to make the difference.
It is cut in carbon T300 "Full Layer", giving it an incredible rigidity and robustness.
Its carbon cage will protect the camera in case of frontal impact, additional benefit, it is tilted and will serve as a mount for an HD camera.
In case of a hard blow, it can recover quickly : to extract the camera you just have to unscrew 2 screws.
A shock on one arm, it will be rehabilitated in no time as well : just remove 2 screws and get rid of the defective arm.
A tough guy with in its center two spacings : 30.5x30.5 and 20x20 which will open simply by removing the top plate without undoing the entire camera block.
Countersunk screws, for a smooth render that will not spoil the lipos for the more reckless who will not put the lipo pad finely cut.
It will match the 16x16 and 16x19 motor spacers and its rear stackable mount will link with a VTX or RX.
Check out all our Frames and the rest of our Lethal Conception Products!
3D Printed Accessories
- Perfect X 230mm Chamfered frame
- 5mm chamfered carbon Arm T300 full layer
- 2mm chamfered Bottom Plate T300 full layer
- 2mm chamfered Top plate T300 full layer
- 2mm chamfered Cross Plate T300 full layer
- 2mm chamfered Camera Plate T300 full layer
- 4mm Bumper T300 full layer
- TPU pigtail mount
- Internal height 20mm
- Motor Mounting 16x16, 16x19
- 125 gr
- 1 x 2mm Top Plate
- 1 x 2mm Front Top Plate
- 1 x 2mm Front Bottom Plate
- 1 x 2mm Bottom Plate
- 4 x 5mm arms
- 1 x 2mm Cross Plate
- 2 x 2mm Camera Plate
- 2 x 4mm Bumper
- 2 x 3mm Strap Plate
- 1 x 2mm Stackable Mount
- 1 x TPU pigtail mount
- 1 x TPU Spacer
- 1 x 3mm Lipo Pad
- 11 x M3 Press Nut
- 6 x M3x20 Alu Black Textured Spacers
- 3 x M3x28 Alu Black Textured Spacers
- 8 x Orange Alu Washer
- 14 x M3x8 Stainless Steel Black Countersunk Head
- 4 x M3x10 Stainless Steel Black Countersunk Head
- 6 x M3x6 Stainless Steel Black Countersunk Head
- 9 x M3x12 Stainless Steel Black Countersunk Head
- 4 x M3x10 Alu 7075 Black
- 4 x M3x18 Alu 7075 Black
- 4 x Black M3 Nylon F / F Spacers
- 4 x FC Softmount
- 8 x M3 Black Nylon Nuts
- 2 x Black Nylon F / F Spacers
- FC: 30x30 or 20x20
- ESC: 4 in 1 or Single
- Camera: all ( except Falkor FullSize )
- VTX: TBS Unify Pro HV or HV Race or Tramp
- Motors: 16x16 or 16x19