The SucceX-E 45A Slick 2-6S ESC is specially designed for FPV racing frames with slim arms like Dove, Dove Lite, Archer. Less weight and less surface for to be more aerodynamic than your opponents. The STM32F071 is combined with a high-performance 3in1 driver to lower the signal delay from throttle to the receiver.
- 6 layers double-sided PCB board
- 3oz 1.4mm thick power board
- TDK MLCC Low ESR ceramic capacitors
- Top grade NTMFS5C430L MOSFET
- MCU: G071
- Up tp 48kHz PWM frequency
- Capacitance: 470μF/50V
- Current Sensor: Yes
- Input: 2-6S LIPO
- RGB LED: Yes
- Constant: 40A / Burst: 45A
- BEC: No
- Supports up to Dshot150/300/600, Dshot600, Proshot, Oneshot, Multishot
- Target: iFlight-BL32-PRO
- Weight:3.3g without wires
- Dimensions: 34*10mm
BLHeliSuite download: https://github.com/blheli-configurator/blheli-configurator/releases
- No additional capacitor needed up to 5S!
- To reduce back EMF and ensure the longevity of your electronics a capacitor with a min. of 220uF 35V for 4-5S, and 50V for 6S is recommended on your main power lead!
- 1 x iFlight SucceX-E 45A Slick 2-6S BLHeli_32 Dshot600 ESC Single
- 1 x 50V 470uF Capacitor
- 1 x Power Cable and ESC Signal Wire Set