Happymodel Mobula6 HDZero 1S 65mm Brushless HD FPV Whoop Drone - FrSky 2.4GHz

Introducing Mobula6 HDZero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only!

We have been working on innovations of Brushless Whoop for a few years. Just like many of you, we are particularly eager to have a 65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other enthusiasts, here the dream comes true finally!

Check out our Micro Whoop Drones and our entire Happymodel Collection!

FC Specifications:

• SPI ELRS version Firmware target: CrazybeeF4SX1280
  
• SPI FRSKY version Firmware target: CrazybeeF4FR
  
• MCU:STM32F411CEU6 (100MHz, 512K FLASH)
  
• Sensor: MPU-6000 or ICM20689 or ICM42688P or BMI270(SPI connection)
  
• Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
  
• Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  
• Built-in Betaflight OSD(SPI Control)
  
• Built-in SPI Frsky/ExpressLRS receiver
  
• Built-in 5V 1A BEC
  
• Built-in voltage detection

4-in-1 ESC Specifications:

• MCU upgraded to EFM8BB21
  
• Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
  
• Currents: 5A continuous peak 6A (5 seconds)
  
• Support BLHeliSuite programmable
  
• Factory firmware: S_H_50_REV16_8.HEX
  
• Default protocol: DSHOT150/DSHOT300/DSHOT600

FRSky SPI Receiver Specifications:

• SPI BUS receiver Frsky D8/D16 compatible
  
• Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt)Channels: 8ch or 16ch
  
• Failsafe support
  
• No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
  
• Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol

Motor Specifications:

• Mode: EX0802 19000KV
  
• Configuration: 9N12P
  
• Stator Diamter: 8mm
  
• Stator Length: 2mm
  
• Shaft Diameter: Φ1mm
  
• Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
  
• Weight(g): 1.7g
  
• No.of Cells(Lipo): 1S only

Gemfan 1219 Propeller Specifications:

• Weight: 0.19g
  
• Material: PC
  
• Pitch: 1 inchProps
  
• Dia: 30mm
  
• Center Hole Dia: 1mm

HDZero Nano Lite Camera Specifications:

• Dimensions: 14x16x11 mm
  
• Weight: 1.5gram
  
• Sensor: 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
  
• Excellent low light performance
  
• FOV:
  4:3: D:130° H:108° v:84°
  16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX Specifications:

• 1S Input
  
• 25mW/200mW RF Output-SmartAudio Support
  
• 25.5×25.5 M2 Soft Mounting- Antenna Retention
  
• Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
  
• 4.5grams/4mm Thickness (without shielding)

Package Includes:

• 1 x Happymodel Mobula6 HDZero 1S 65mm Brushless HD FPV Whoop Drone - FrSky 2.4GHz
  
• 2 x Mobula6 Spare Canopy
• 1 x Gemfan 1210 31mm propeller(4cw+4ccw)
• 1 x Propeller disassemble tool
  
• 1 x Screwdriver

NOTE: 

Since different batches of flight controllers integrate different gyro sensor, please pay attention to the direction setting of the gyro sensor

MPU6000/ICM20689/ICM42688P Gyro direction “CW90°”   Yaw degrees “0”

BMI270 Gyro direction “CW0°”   Yaw degrees “0”