BetaFPV F4 Brushless Flight Controller and V2.0 ESC 16A Stack

Regular price $66.99 Sale

Availability: Available Unavailable

Product SKU: 4C-8204

Product Details

After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.stack

We also carry boards individually:

Check out all other Whoop style Flight Controllers, and our BetaFPV collection!

BLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, which is written for ESC's that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!

Know more about BLHeli_32 ESC from Oscarliang's blog.

Check out Joshua Bardwell's video to know every detail of BLHeli_32


SPECIFICATIONS OF FC:

  • CPU: STM32F405 (Overclock to 240MHz)
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: BETAFPVF405 (BEFH)
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
  • TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
  • Buzzer solder pads
  • Support programable LED like WS2812 etc
  • Weight: 4.2g

DIAGRAM FOR F405 4S FC:


F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32)

SPECIFICATIONS OF ESC:

  • Support BLHELI_32
  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
  • Input voltage: 3-4S lipo
  • Cotinue current: 16A
  • Peak current: 19A 
  • Firmware target: BETAFPV-16A-32bit
  • MCU: STM32F051K66
  • Motor Connectors: 1.25mm header pins connector
  • Weight: 4.4g (7.7g with XT30 cable) 

DIAGRAM FOR F405 4S FC:

F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32)

F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32)

PARTS UPDATED

  • F405 4S FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.

  • Using single N-channel MosFETs on ESC board, which has a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board. Current sensor included.
F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32)

  • BLHeli_32 ESC is soldering with 25V/220uf electrolytic capacitor, for reducing the defective rate caused by the instantaneous high voltage.

HOW TO ASSEMBLE FC & ESC 

In order to be convenient for the installation and decrease the dislocated PIN mounting, we have added a port for ESC connection. Separate installation, in case the mutural vibration may interfere between FC and ESC.

F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32)

HOW TO ASSEMBLE FC & LED BOARD

In order to be convenient for the installation, we have added a port for LED board connection. 

F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32)

RECOMMENDED RECEIVER CONNECTION

In order to be convenient for the installation, we have added a port for RX connection. All the ports are available on this board. So that you could connect any receiver you want on the board. For example.

  • Frsky XM/XM+ Receiver
  • Flysky Receiver
  • TBS receiver
  • DSMX receiver

Here is the connection diagram with Frsky XM receiver or XM+ receiver

Here is the connection diagram with Flysky receiver.

Here is the connection diagram with Futabe-X-BOSS AC900 receiver.

Here is the connection diagram with TBS Crossfire receiver.

Here is the connection diagram with DSMX FullSpeed receiver.

RECOMMENDED PARTS LIST

  • Frame:  Beta85X frame
  • Motors: 1105 5000KV motors with 1.5mm header pins connector
  • Battery: 450mAh 4S battery
  • Props: 2" 4-Blades Props

PACKAGE INCLUDES:


    Loading...

    Your cart

    x