The Holybro Kakute G4 AIO FC w/ 35A ESC is a powerful and compact fight controller + 4in1 ESC All-in-One board that is plug and play with digital systems such as the DJI O3 at full power. It also works with analog systems due to the onboard OSD chip. The FC on this AIO uses a G4 processor, and the 4in1 ESC uses four F4 processors running AM32 firmware.

It has STM32G4 MCUs, ICM-42688p gyro, 5V & 10V BEC, 16MB of flash storage, DSP310 baro, plug & play port for digital VTX, and 35A 4in1 ESC, all in a small form factor weighing only 7.5g.

It also comes in a super-hydrophobic nano-waterproof coating. This coating allows air to pass through while avoiding water, giving extra protection from moisture and other elements.

Checkout all our Whoop Style AIO Boards and the rest of our Holybro Collection!

Features:

AIO board with G4 Processor FC & F4 ESC
35A ESC running AM32 firmware, capable of up to 6S
10V/2.5A BEC for DJI O3 Air Unit
Digital VTX port
Superhydrophobic Nano Coating

Specifications

Flight Controller
- MCU: STM32G473
- Gyro: ICM42688
- Baro: DPS310
- BEC
- Blackbox: 128Mbit (16MB) Flash
- OSD: AT7456
- UART: 5 total
4in1 ESC:
- AM32 firmware with F4 MCU
- Input Voltage: 2S-6S
- PWM Frequency 8k to 48k
- Supports
- Onboard analog current sensor
- Metal MOSFETs for better heat dissipation
Mechanical Specification
- Mounting - 25 x 25mm/Φ3mm hole with Φ2mm Grommets
- Dimension - 33x33mm
- Weight - 7.5g

Package Includes:

1X KAKUTE G4 AIO 35A
1x Capacitor 35V 470µF
2X 6 Pin SH1.0- 8 Pin GHR1.25 Cable (DJI VTx)
1X 6 Pin SH1.0 Cable
4X M2 Anti-Vibration Silicone Grommet Insert

Holybro Kakute AIO G473 Flight Controller and Built-In 35A F4 AM32 2-6S 4in1 ESC - 25x25mm