Let's introduce our latest member to our ProTek family, the all-new iFlight ProTek60 Cinelifter!

We've came a long way with action cameras, offering outstanding quality with little weight and a small footprint. But do you want to get professional or shoot some commercials, maybe get into cinema videography? Well, then you need to step up your game. Those cameras offer higher quality but bigger lenses, higher weight in exchange with all the dynamic range, color profiles and crisp footage you might possibly want.

This rig was designed for a Komodo, Zcam, BMPCC or even a GH5. It fits right onto, safe and tight.

Recommended battery size: 6S 3700mAh - 6S 4400mAh

Estimated flight time: 3-6 min (depending on battery and your take-off weight)

Check out our new Cinelifter Collection , Protek60 Collection and the rest of our iFlight Products!

Recommended Battery:

Pyrodrone 6S 4500mAh 120C Cinelifter Pack

Highlights and Features:

Protected Propellers for indoor and outdoor use, protecting whatever you might bump into from nasty cuts
Universal camera mount and accessories for a wide range of cameras to install
iFlight ESC Commander PCB // Power distribution board with high capacitance and heat dissipation
Single X-Class grade ESC motor drivers for more power and reliability
Big size XING2 3110 // The power motors with extreme lift and flight performance
GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)
Up to 110 km/h // 1.5 kg payload // Total lift off weight up 3.5 kg (recommended max. MTOW)

ProTek60 Pro BNF Specs:

BLITZ F7 Flight Controller
SucceX X80A X-Class ESC
Motor: XING2 3110 1600KV
GPS module: iFlight M8Q-5883-GPS & Compass V2.0
Wheelbase: 282mm
Body Size: 380*351mm
Top and bottom plate spacing: 35mm (aluminum standoff height)
Propeller size: 6 inch
Weight: 1330g (without battery)

FC // BLITZ F7

MCU: STM32 F722
Gyro: MPU6000
Baro: NO

OSD: AT7456E
BEC:5V 2.5A
BlackBox:32MB
UARTs: 6
Smart audio / IRC Tramp VTX protocol supported
WS2812ledStrip: Yes

Bepper: Yes
Firmware Target: IFRC-IFLIGHT_BLITZ_F722
Mounting pattern: 30.5*30.5mm/φ4
Dimensions: 36.5*35mm
Weight: 7.8g

ESC // iFlight ESC Commander PCB (4x SucceX X80A)

MCU: G071
Capacitance per ESC: total 240UF Low ESR
Current Sensor: Yes
Input: 2-8S LIPO
BlHeli32 telemetry: Yes
BEC: No
Supports up to DShot DShot150/300/600/1200/MultiShot/OneShot PWM Drive
Firmware Target: iFlight-BL32-PRO
Weight:8.1g
Dimension: 40*17mm

ProTek60 Pro HD BNF Included Components and Parts

pre-built and tested ProTek60 Pro
1 x Fullsend X 6S 70C 4400mAh
1 x DJI FPV Air Unit Module + Camera
2 x Albatross LHCP 5.8GHz 100mm SMA FPV Antenna
4 x 6x4x3 Propellers (Color may vary)
2 x iFlight Lipo Strap 20*295mm (Black)
1 x Battery Quick Mount
1 x Prop Wrench
1 x XT90 Male to XT60 Female Adapter Wire

Note:

All iFlight BNFs are tested before shipment to guarantee the highest quality.

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support.

iFlight ProTek60 Pro HD 6S Cinelifter w/ DJI Air Unit - Choose Version