Talon F7 V2 MPU6000 20X20 Flight Controller

Regular price $32.99 Sale

Availability: Available Unavailable

Product SKU: 1E-6676

MCU: STM32F722RET6 216MH Proven noise free MPU6000 Buily in Betaflight OSD Up to 8S (36V) direct battery power Buzzer pads for external buzzer  Built in voltage monitoring resistor 5V 2A BEC Dedicated LDO for Gyro, noise free gyro power Dedicated...

Product Details

  1. MCU: STM32F722RET6 216MH
  2. Proven noise free MPU6000
  3. Buily in Betaflight OSD
  4. Up to 8S (36V) direct battery power
  5. Buzzer pads for external buzzer
  6.  Built in voltage monitoring resistor
  7. 5V 2A BEC
  8. Dedicated LDO for Gyro, noise free gyro power
  9. Dedicated LDO for OSD, cleaner OSD signal
  10. Led strip shares 5V with 5V/2A BEC
  11. 6 UARTS: UART1, UART2, UART3, UART4, UART5, UART6
  12. Built in camera control pin with resistor and capacitor
  13. 5 Full UARTS with RX AND TX pins
  14. Logical pin layout for cleanest build possible
  15. 8 pin 4 IN 1 ESC plug
  16. Remapable LED pad for additional motor output
  17. TX3,RX3 can be used for I2C for external compass
  18. 5V, VBAT selectable VTX and CAM power
  19. 16M Blackbox flash chip
  20. No flicker VTX pit mode switch (positive switch)
  21. M4 Can be selected either led_strip signal or M4 signal for RPM filtering

20 X 20 mounting hole with true 25mm board dimensions

 

To get Motor 4 to work please use the CLI command below using Betaflight V4.0.4. A custom hex is coming soon for 4.0.4.

Resource MOTOR 6 None

Resource MOTOR 4 C08

Save

To get 5V to your VTX please go to the mode tab in Betaflight and setup a mode switch for vtx_pit

 

TOP LAYOUT

BOTTOM LAYOUT

Loading...

Your cart

x