Talon F7 BB 20X20 Flight Controller

Regular price $32.99 Sale

Availability: Available Unavailable

Product SKU: 6113

Now with Black Box! A new generation of Talon is here. With a F7 processor and 8S capable, Talon is the only 20X20 on the market with a STM32F722RET6 216MHz processor.  Built in Betaflight OSD, 6 UARTS, and dedicated LDOs...

Product Details

Now with Black Box! A new generation of Talon is here. With a F7 processor and 8S capable, Talon is the only 20X20 on the market with a STM32F722RET6 216MHz processor.  Built in Betaflight OSD, 6 UARTS, and dedicated LDOs for cleaner gyro and OSD signals makes Talon F7 the most powerful 20X20 FC on the market. One of the features Talon F4 users praised is the choice of using the 8 pin harness or direct soldering motor ports to the ESC. We’ve kept that option, while still adding more features, by letting you remove the plastic connector to reveal motor ports.  Now includes 3 harness cables for direct pin to Aikon AK32PIN, Spedix GS25A, and Airbot Ori32.


Main Features

  1. MCU: STM32F722RET6 216MHz
  2. 6-Axis ICM20602 32K
  3. Built in Betaflight OSD
  4. Up to 8S (36V) direct battery power
  5. Buzzer pads for external buzzer
  6. Build in voltage monitoring resistor
  7. 5V 2A BEC
  8. 16MB Black Box
  9. Dedicated LDO for gyro for cleaner gyro signal
  10. Dedicated LDO for OSD for cleaner OSD signal
  11. Led strip shares 5V with 5V/2A BEC
  12. 6 UARTS: UART1, UART2, UART3, UART4, UART5, UART6
  13. Built in camera control pin with resistor and capacitor
  14. 4 Full UARTS with RX/TX pins
  15. Logical pin layout for cleanest build possible
  16. 8 pin 4 IN 1 ESC plug (Direct solder motor ports underneath)
  17. Remap able LED pad for additional motor output
  18. TX3 & RX3 can be used for I2C for external compass
  19. 5V or 3.3V selectable receiver power
  20. 5V, VBAT selectable VTX and CAM power
  21. Includes * 3 pin connector harness cables for direct pin to Aikon AK32PIN, Spedix GS25A, and Airbot Ori32, 8 grommets, M3 to M2 nut adapters, M3X5 standoffs


Betaflight Target: CLRACINGF7


If there is a delay in startup for the CLF7 target, type the commands below in the CLI

resource i2c_sda 2 none
resource i2c_scl 2 none
save

this will fix the delay start up problem

 

Top View



Bottom View



WARNING! If you remove the JST connector to direct solder, the pinout is not the same as the JST connector. Please use the diagram below to see the correct pinout. Please pay attention to VBAT and Ground!



Loading...

Your cart

x